Kia Carnival (2009+). Manual — part 475

2009 > G 2.7 DOHC >

REPLACEMENT

DDM/ADM

1. Disconnect the negative battery terminal.

2. Remove the front door trim panel. (Refer to the Body group - Front door)

3. Remove the door module (A) mounting screws (5EA) after disconnecting the connector (3EA) from the actuator.

4. Remove the front door modules (DDMDM) from the front door trim panel.

INSPECTION

1. The DDM inputs can be checked using the scan tool..

2. To check the Input Value of door lock switch, select option "09. BODY CONTROL MODULE".

3. Select option "04. DRIVER DOOR MODULE".

4. Select option "02. CURRENT DATA".

5. To check the Input Value of door lock switch in force mode, select option "05. ACTUATION TEST".

Body Electrical System

Power Sliding Door System

Body Electrical System