Kia Carnival (2009+). Manual — part 92

4. Install the wheel and the tire (A) to the rear hub (B).

Tightening torque Nm (kgf.m, lb-ft) :
90 ~ 110 (9 ~ 11, 65.1 ~ 79.5)

Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).

INSPECTION

Rear lower arm

1. Check the bushing for wear and deterioration.

2. Check the center arm for bending or breakage.

3. Check the bolts for damage.

Spring

1. Check the spring for distortion, aging or damage.

2. Check the spring upper pad for aging or damage.

Suspension System

Rear Suspension System - Rear Assist Arm

Suspension System

2009 > G 3.8 DOHC >

COMPONENTS

2009 > G 3.8 DOHC >

REMOVAL

1. Loosen the wheel nuts slightly. Raise the rear of the vehicle, and make sure it is securely supported.

2. Remove the rear wheel and tire (A) from rear hub (B).

Be careful not to damage the hub bolts (C) when removing the rear wheel and tire (A).

3. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire as shown in

the illustration.

4. Remove the rear assist arm (A) ball joint self-locking nut (B) and the cotter pin.

Была ли эта страница вам полезна?
Да!Нет
1 посетитель считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности