Kia Carnival (2009+). Manual — part 313

8. Install the under cover (A).

9. Install the steering column joint bolt and the VRS connector (A). (see ST group)

10. Connect the return tube(A) with a clamp. (see ST group)

11. Install the front wheels and tires.

12. Tighten the transaxle insulator mounting (B) bolt (A).

TORQUE:
90~110 Nm(9~11 kgf.m, 65.1~79.5 lb-ft)

13. Tighten the transaxle mounting bolts (A).

TORQUE:
65~85 Nm(6.5~8.5 kgf.m, 47.0~61.5 lb-ft)

14. Remove the SST (09200-38001) holding the engine and transaxle assembly.

15. Install the starter motor. (see EE group).

TORQUE:
65~85 Nm(6.5~8.5 kgf.m, 47.0~61.5 lb-ft)

16. Connect the power steering pressure tube (A) to the power steering oil pump.

17. Connect the transaxle oil cooler hoses (A) to the tubes by fastening the clamps (B).

18. Install the control cable assembly(C) by tightening the nut (A) and clip (B).

TORQUE:
8~12 Nm(0.8~1.2 kgf.m, 5.8~8.6 lb-ft)

19. Install the inhibiter switch connector (A).

20. Install the solenoid valve connector (A).

21. Install the input speed sensor connector (A).

22. Install the output speed sensor connector (A).

23. Install the vehicle speed sensor connector (A).

24. Install the battery tray (B) by removing the four mounting bolts (A).