Kia Soul (2020 year). Owner's manual — part 11

Features of your vehicle

84

4

Parking distance warning-reverse

WARNING

Parking distance warning-reverse
Never rely solely on the parking dis-
tance warning-reverse. Always per-
form a visual inspection to make
sure the vehicle is clear of all
obstructions before moving the
vehicle in any direction. Stop imme-
diately if you are aware of a child
anywhere near your vehicle. Some
objects may not be detected by the
sensors, due to the object's size or
material.

Operation of the parking distance
warning-reverse

Operating condition

䳜 This system will activate when

the indicator on the rear parking
assist OFF button is not illumi-
nated. If you desire to deactivate
the rear parking assist system,
press the rear parking assist OFF
button again. (The indicator on
the button will illuminate.) To turn
the system on, press the button
again. (The indicator on the but-
ton will go off.)

䳜 This system will activate when

backing up with the ignition
switch ON.
If the vehicle is moving at a speed
over 5 km/h (3 mph), the system
may not be activated correctly.

䳜 The sensing distance while the

back-up warning system is in
operation is approximately 120
cm (47 in) at the rear bumper
center area, 60 cm (23.5 in) at the
rear bumper side area.

䳜 When more than two objects are

sensed at the same time, the
closest one will be recognized
first.

Types of warning sound

䳜 When an object is 120 cm to 61

cm (47 in to 24 in) from the rear
bumper: Buzzer beeps intermit-
tently.

䳜 When an object is 60 cm to 31 cm

(23 in to 12 in) from the rear
bumper: Buzzer beeps more fre-
quently.

䳜 When an object is within 30 cm

(11 in) of the rear bumper:
Buzzer sounds continuously.

Non-operational conditions of
parking distance warning-reverse

The parking distance warning-
reverse may not operate properly
when:

1. Moisture is frozen to the sensor.

(It will operate normally once the
moisture clears.)

2. The sensor is covered with foreign

matter, such as snow or water, or
the sensor cover is blocked. (It will
operate normally when the mate-

85

4

4

Features of your vehicle

Parking distance warning-reverse

rial is removed or the sensor is no
longer blocked.)

3. Driving on uneven road surfaces

(unpaved roads, gravel, bumps,
gradient).

4. Objects generating excessive

noise (vehicle horns, loud motor-
cycle engines, or truck air brakes)
are within range of the sensor.

5. Rain or water spray exists.
6. Wireless transmitters or mobile

phones are within range of the
sensor.

7. The sensor is covered with snow.
8. Trailer towing

The detecting range may decrease
when:

1. The sensor is covered with foreign

matter such as snow or water.
(The sensing range will return to
normal when removed.)

2. Outside air temperature is

extremely hot or cold.

The following objects may not be
recognized by the sensor:

1. Sharp or slim objects such as

ropes, chains or small poles.

2. Objects which tend to absorb the

sensor frequency such as clothes,
sound absorbent material or
snow.

3. Undetectable objects smaller than

1 m (40 in) in height and narrower
than 14 cm (6 in) in diameter.

Parking distance warning-reverse
precautions
䳜 The parking distance warning-

reverse system may not sound
consistently depending on the
speed and shapes of the objects
detected.

䳜 The parking distance warning-

reverse system may malfunction
if the vehicle bumper height or
sensor installation has been mod-
ified or damaged. Any non-fac-
tory installed equipment or
accessories may also interfere
with the sensor performance.

䳜 The sensor may not recognize

objects less than 30 cm (11 in)
from the sensor, or it may sense
an incorrect distance. Use caution.

䳜 When the sensor is frozen or cov-

ered with snow, dirt, or water, the
sensor may be inoperative until
the material is removed using a
soft cloth.

䳜 To prevent damage, do not push,

scratch or strike the sensor.

NOTICE

This system can only sense objects
within the range and location of the
sensors. It cannot detect objects in
other areas where sensors are not
installed. Also, small or slim objects,
such as poles or objects located
between sensors may not be
detected by the sensors. Pay close
attention when the vehicle is driven

Features of your vehicle

86

4

Parking distance warning

close to objects on the road, partic-
ularly pedestrians, and especially
children. Always visually check
behind the vehicle when backing up.
Be sure to inform any drivers of the
vehicle that may be unfamiliar with
the system regarding the system's
capabilities and limitations.

Self-diagnosis

If you don't hear an audible warning
sound or if the buzzer sounds inter-
mittently when shifting the gear to
the R (Reverse) position, this may
indicate a malfunction in the parking
distance warning-reverse system. If
this occurs, have your vehicle
checked by an authorized Kia dealer
as soon as possible.

NOTICE

Your new vehicle warranty does not
cover any accidents or damage to
the vehicle or injuries to its occu-
pants. Always drive safely and cau-
tiously.

Parking distance warning (if
equipped)

The parking distance warning
assists the driver during movement
of the vehicle by chiming if any
object is sensed within the distance
of 100 cm (39 in) in front and 120
cm (47 in) behind the vehicle.

Rear

Front

OSK3048001NR

OSK3048003NR

87

4

4

Features of your vehicle

Parking distance warning

The sensing range and objects
detectable by the sensors (1) are
limited. Whenever moving pay as
much attention to what is in front
and behind of you as you would in a
vehicle without a parking distance
warning.

WARNING

The parking distance warning is a
supplemental system only.
The operation of the parking dis-
tance warning can be affected by
several factors (including environ-
mental conditions).
It is the responsibility of the driver
to always check the front and rear
views before and while parking.

Operation of the parking distance
warning

Operating condition

䳜 This system activates when the

parking distance warning button
is pressed with the ignition switch
or START/STOP button ON.

䳜 The indicator of the parking dis-

tance warning button turns on
automatically and activates the
parking distance warning when
you shift the gear to the R
(Reverse) position. It will turn off
automatically when you drive
above 20 km/h (12.4 mph).

䳜 The sensing distance while back-

ing up is approximately 120 cm
(47 in) when you are driving less
than 10 km/h (6.2 mph).

䳜 The sensing distance while mov-

ing forward is approximately 100
cm (39 in) when you are driving
less than 10 km/h (6.2 mph).

䳜 When more than two objects are

sensed at the same time, the
closest one will be recognized
first.

䳜 The side sensors are activated

when you shift the gear to the R
(Reverse) position.

䳜 If the vehicle speed is above 20

km/h (12.4 mph), the system
automatically turns off. To acti-
vate again, push the button.

NOTICE

It may not operate if the vehicle's
distance from the object is already
less than approximately 25 cm (10
in) when the system is activated.

OSK3048002NR

Features of your vehicle

88

4

Parking distance warning

Type of warning indicator and sound

NOTICE

䳜 The actual warning sound and

indicator may differ from the
illustration depending on the
objects or sensor status.

䳜 Do not wash the vehicle's sensor

with high pressure water.

NOTICE

䳜 This system can only sense

objects within the range and loca-
tion of the sensors; It cannot
detect objects in other areas
where sensors are not installed.
Also, small or slim objects, such as
poles or objects located between
sensors may not be detected by
the sensors.
Always visually check behind the
vehicle when backing up.

䳜 Be sure to inform any drivers of

the vehicle that may be unfamiliar
with the system regarding the
systems capabilities and limita-
tions.

Distance from object

Warning indicator

Warning sound

When driving forward When driving rearward

100~61 cm

(39~24 inch)

Front

-

Buzzer beeps intermit-

tently

120~61 cm

(47~24 inch)

Rear

-

Buzzer beeps intermit-

tently

60~31 cm

(23~12 inch)

Front

Buzzer beeps frequently

Rear

-

Buzzer beeps frequently

30 cm

(11 inch)

Front

Buzzer beeps continu-

ously

Rear

-

Buzzer beeps continu-

ously

89

4

4

Features of your vehicle

Parking distance warning

Non-operational conditions of
parking distance warning

Parking distance warning may not
operate normally when:

䳜 Moisture is frozen to the sensor.

(It will operate normally when
moisture melts.)

䳜 Sensor is covered with foreign

matter, such as snow or water, or
the sensor cover is blocked. (It will
operate normally when the mate-
rial is removed or the sensor is no
longer blocked.)

䳜 Sensor is stained with foreign

matter such as snow or water.
(Sensing range will return to nor-
mal when removed.)

䳜 The parking assist button is off.

There is a possibility of parking dis-
tance warning malfunction when:

䳜 Driving on uneven road surfaces

such as unpaved roads, gravel,
bumps, or gradient.

䳜 Objects generating excessive

noise such as vehicle horns, loud
motorcycle engines, or truck air
brakes can interfere with the
sensor.

䳜 Heavy rain or water spray.
䳜 Wireless transmitters or mobile

phones present near the sensor.

䳜 Sensor is covered with snow.

Detecting range may decrease
when:

䳜 Outside air temperature is

extremely hot or cold.

䳜 Undetectable objects smaller than

1 m (4 in) and narrower than 14
cm (5.5 in) in diameter.

The following objects may not be
recognized by the sensor:

䳜 Sharp or slim objects such as

ropes, chains or small poles.

䳜 Objects, which tend to absorb

sensor frequency such as clothes,
spongy material or snow.

NOTICE

1. The warning may not sound con-

sistently depending on the speed
and shapes of the objects
detected.

2. The parking distance warning

may malfunction if the vehicle
bumper height or sensor installa-
tion has been modified. Any non-
factory installed equipment or
accessories may also interfere
with the sensor performance.

3. Sensor may not recognize objects

less than 30 cm (12 in) from the
sensor, or it may sense an incor-
rect distance. Use with caution.

4. When the sensor is frozen or

stained with snow or water, the
sensor may be inoperative until
the stains are removed using a
soft cloth.

Features of your vehicle

90

4

Parking distance warning

5. Do not push, scratch or strike the

sensor with any hard objects that
could damage the surface of the
sensor. Sensor damage could
occur.

NOTICE

This system can only sense objects
within the range and location of the
sensors, it cannot detect objects in
other areas where sensors are not
installed. Also, small or slim objects,
or objects located between sensors
may not be detected.
Always visually check in front and
behind the vehicle when driving. Be
sure to inform any drivers in the
vehicle that may be unfamiliar with
the system regarding the systems
capabilities and limitations.

NOTICE

Pay close attention when the vehicle
is driven close to objects on the
road, particularly pedestrians, and
especially children. Be aware that
some objects may not be detected
by the sensors, due to the objects
distance, size or material, all of
which can limit the effectiveness of
the sensor. Always perform a visual
inspection to make sure the vehicle
is clear of all obstructions before
moving the vehicle in any direction.

Self-diagnosis

When you shift the gear to the R
(Reverse) position and if one or
more of the below occurs you may
have a malfunction in the parking
distance warning system.
䳜 You don't hear an audible warning

sound or if the buzzer sounds
intermittently.

䳜

(blinks) is displayed.

If this occurs, we recommend that
the system be checked by an
authorized Kia dealer.

NOTICE

Your new vehicle warranty does not
cover any accidents or damage to
the vehicle or injuries to its occu-
pants. Always drive safely and cau-
tiously.

91

4

4

Features of your vehicle

Rear view monitor

Rear view monitor

The rearview camera will activate
with the ignition switch or START/
STOP button in the ON and the shift
lever in the R (Reverse) position.

䳜 This system is a supplemental

system only. It is the responsibil-
ity of the driver to always check
the inside/outside rearview mir-
rors and the area behind the vehi-
cle before and while backing up.

䳜 Always keep the camera lens

clean. If lens is covered with for-
eign matter, the camera may not
operate normally.

* If your vehicle is equipped with

multimedia system, rearview dis-
play image will show behind the
vehicle through the multimedia
screen while backing-up. Refer to a
separately supplied manual for
detailed information.

WARNING

Backing & using camera
Never rely solely on the rear view
camera. You must always use
methods of viewing the area behind
you including looking over both
shoulders as well as continuously
checking all three rear view mirrors.
Due to the difficulty of ensuring
that the area behind you remains
clear, always back up slowly and
stop immediately if you even sus-
pect that a person, and especially a
child, might be behind you.

OSK3048004NR

OSK3048005NR

Features of your vehicle

92

4

Lighting

Lighting

This vehicle is equipped with a vari-
ety of lights to illuminate the inte-
rior and exterior of the vehicle.

Battery saver function

The purpose of this feature is to
prevent the battery from being dis-
charged if the lights are left in the
ON position. The system automati-
cally shuts off the parking lights 30
seconds after the vehicle is turned
off and the driver's door is opened
and closed.

With this feature, the parking lights
will turn off automatically if the
driver parks on the side of the road
at night and opens the driver's side
door.

If necessary, to keep the parking
lights on when the vehicle is turned
off, perform the following:
1. Open the driver-side door.
2. Turn the parking lights OFF and

ON again using the light switch on
the steering column.

Headlight escort function (if
equipped)

If you turn the ignition switch or
START/STOP button to the ACC or
OFF position with the headlights ON,
the headlights remain on for about
5 minutes.

However, if the driver's door is
opened and closed, the headlights
are turned off after 15 seconds.

The headlights can be turned off by
pressing the lock button on the
transmitter (or smart key) one
more or turning the light switch to
the OFF position.

Daytime running light (if equipped)

The Daytime Running Lights (DRL)
can make it easier for others to see
the front of your vehicle during the
day.

DRL can be helpful in many different
driving conditions, and it is especially
helpful after dawn and before sun-
set.

The DRL system will turn the dedi-
cated lamp OFF when:
䳜 The headlight switch is on.
䳜 The taillight is in the ON position.
䳜 The vehicle is off.
䳜 The front fog light is on.
䳜 Engaging the Parking Brake

93

4

4

Features of your vehicle

Lighting

Lighting control

The light switch has a Headlight and
a Parking light position.

To operate the lights, turn the knob
at the end of the control lever to
one of the following positions:
1. OFF position / DRL off position.
2. Auto light position
3. Parking & Tail light
4. Headlight position

Parking Tail light

When the light switch is in the park-
ing light position, the tail, license and
instrument panel lights will turn ON.

Headlight position

When the light switch is in the head-
light position, the head, tail, license
lights will turn ON.

NOTICE

The ignition switch or START/STOP
button must be in the ON position to
turn on the headlights.

Auto light (if equipped)

When the light switch is in the AUTO
light position, the taillights and
headlights will turn ON or OFF auto-

ODEEV068131NR

ODEEV068132NR

ODEEV068133NR

OSK3048083NR

Features of your vehicle

94

4

Lighting

matically depending on the amount
of light outside the vehicle.

CAUTION

䳜 Never place anything over the

sensor (1) located on the instru-
ment panel as this will ensure
better auto-light system control.

䳜 Don't clean the sensor using a

window cleaner, the cleaner may
leave a light film which could
interfere with sensor operation.

䳜 If your vehicle has window tint or

other types of metallic coating on
the front windshield, the Auto
light system may not work prop-
erly.

Operating high beam

To turn on the high beam headlamp:
䳜 Push the lever away from you.

The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams
are switched on.

To prevent the battery from being
discharged, do not leave the lights
on for a prolonged time while the
vehicle is off.

WARNING

High beams
Do not use high beam when there
are other vehicles in front of or
approaching your vehicle. Using high
beam could obstruct the other
driver's vision.

To flash the headlights:
䳜 Pull the lever towards you.

It will return to the normal (low
beam) position when released.
The headlight switch does not
need to be on to use this flashing
feature.

ODEEV068135NR

ODEEV068136NR

95

4

4

Features of your vehicle

Lighting

Operating turn signals and lane
change signals

The ignition switch or START/STOP
button in the must be on for the
turn signals to function.

To turn on the turn signals:
䳜 Move the lever up or down (A).

The green arrow indicators on the
instrument panel indicate which
turn signal is operating.
They will self-cancel after a turn
is completed. If the indicator con-
tinues to flash after a turn, man-
ually return the lever to the OFF
position.

To signal a lane change:
䳜 Move the turn signal lever slightly

and hold it in position (B).
The lever will return to the OFF
position when released.

If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace-
ment.

NOTICE

If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec-
tion in the circuit.

One-touch lane change function

To activate an one-touch lane
change function, move the turn sig-
nal lever slightly and then release it.
The lane change signals will blink 3
times.

Operating front fog light (if
equipped)

Fog lights are designed to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.

The fog lights will turn on when the
fog light switch (1) is turned to the
on position after the headlight is
turned on.

ODEEV068137NR

ODEEV068138NR

Features of your vehicle

96

4

Lighting

To turn off the fog lights:
䳜 Turn the fog light switch (1) to

the OFF position.

High Beam Assist (if equipped)

The High Beam Assist is a system
that automatically adjusts the
headlamp range (switches between
high beam and low beam) depending
to the brightness of detected vehi-
cles and certain road conditions.

Operating High Beam Assist

The High Beam Assist can be oper-
ated using the light switch.
1. Place the light switch in the AUTO

position.

2. Turn on the high beam by pushing

the lever away from you. The

High Beam Assist (

) indicator

will illuminate.

The High Beam Assist will turn on
when vehicle speed is above 40 km/
h (25 mph).

The details of operation with the
light switch while the High Beam
Assist is on are below.
䳜 If the light switch is pushed away,

the High Beam Assist will turn off
and the high beam will be on.

䳜 If the light switch is pulled

towards you when the high beam
is off, the high beam will be on
without canceling the operation
of the High Beam Assist. (When
you hands off, the lever will move
to the middle and the high beam
will turn off.)

䳜 If the light switch is pulled

towards you when the high beam
is on by the High Beam Assist, the
low beam will be on and the High
Beam Assist will turn off.

䳜 If the light switch is turned to the

headlamp position (

) from

AUTO position, the High Beam
Assist will turn off and the low
beam will be on.

When the High Beam Assist is oper-
ating, the high beam switches to
low beam in the following condi-
tions.
䳜 When the headlamp is detected

from the on-coming vehicle.

䳜 When the tail lamp is detected

from the front vehicle.

䳜 When headlamp / tail lamp of

bicycle/motorcycle is detected.

䳜 When the surrounding is so bright

that high beams are not needed.

䳜 When streetlights or other lights

are detected.

ODEEV068139NR

97

4

4

Features of your vehicle

Lighting

䳜 When the light switch is not in the

AUTO position.

䳜 When the High Beam Assist is off.
䳜 When vehicle speed is below 24

km/h (15 mph).

High Beam Assist warning light and
message

When the High Beam Assist System
is not working properly, a warning
message "Check High Beam Assist
(HBA) system" will come on for a
few second.

After the message disappears, the

master warning light (

) will illu-

minate. Take your vehicle to an
authorized Kia dealer and have the
system checked.

CAUTION

The High Beam Assist system may
not work properly in the following
situations:
䳜 When the light from a vehicle is

poor
- When the light from a vehicle is

not detected because of lamp
damage, or because it is hidden
from sight, etc.

- When the lamp of a vehicle is

covered with dust, snow or
water.

- When a vehicle's headlamps are

off but the fog lamps on and
etc.

䳜 When external conditions inter-

vene
- When there is a lamp that has a

similar shape as a vehicle's
lamps.

- When the headlamp is not

repaired or replaced at an
authorized dealer.

- When headlamp aiming is not

properly adjusted.

- When driving on a narrow

curved road, rough road, down-
hill or uphill.

- When only part of the vehicle in

front is visible on a crossroad or
curved road.

- When there is a traffic light,

reflecting sign, flashing sign or
mirror ahead.

OSK3048162NR

Features of your vehicle

98

4

Lighting

- When there is a temporary

reflector or flash ahead (con-
struction area).

- When the road conditions are

bad such as being wet, iced or
covered with snow.

- When a vehicle suddenly

appears from a curve.

- When the vehicle is tilted from

a flat tire or being towed.

䳜 When front visibility is poor

- When the lamp of the on-com-

ing or front vehicle is covered
with dust, snow or water.

- When the light from a vehicle is

not detected because of
exhaust fume, smoke, fog,
snow, etc.

- When the front window is cov-

ered with foreign substance.

- When it is hard to see because

of fog, heavy rain or snow and
etc.

NOTICE

䳜 Do not disassemble a front view

camera temporarily for tinted
window or attaching any types of
coatings and accessories. If you
disassemble the camera and
assemble it again, take your vehi-
cle to an authorized Kia dealer
and have the system checked.

䳜 When you replace or reinstall the

windshield glass take your vehicle
to an authorized Kia dealer and
have the system checked.

䳜 Be careful that water doesn't get

into the High Beam Assist unit
and do not remove or damage
parts of the High Beam Assist
system.

䳜 Do not place objects on the dash

board that reflect light such as
mirrors, white paper, etc. The
system may not be able to func-
tion if sunlight is reflected.

䳜 At times, the High Beam Assist

may not operate due to system
limitations. The system is for
your convenience only.
It is the responsibility of the driver
to drive safely and always check
the road conditions.

䳜 When the system does not oper-

ate normally, change the lamp
position manually between the
high beam and low beam.

99

4

4

Features of your vehicle

Wipers and washers

Wipers and washers

The wipers and washers remove
foreign substances from the wind-
shield and rear window, helping to
maintain visibility.

Front windshield wiper/washer

Rear windshield wiper/washer

A: Wiper speed control (front)
䳜 MIST 䳍 Single wipe
䳜 OFF 䳍 Off
䳜 INT 䳍 Intermittent wipe
䳜 LO 䳍 Low wiper speed
䳜 HI 䳍 High wiper speed

B: Intermittent control wipe time
adjustment

C: Wash with brief wipes (front)

D: Rear wiper/washer control
䳜 HI 䳍 Continuous wipe
䳜 LO 䳍 Intermittent wipe
䳜 OFF 䳍 Off

E: Wash with brief wipes (rear)

Windshield washers

Operates as follows when the igni-
tion switch or START/STOP button is
turned ON.

MIST: For a single wiping cycle, move
the lever to this (MIST) position and
release it. The wipers will operate
continuously if the lever is held in
this position.

OFF: Wiper is not in operation

INT: Wiper operates intermittently
at the same wiping intervals. Use
this mode in light rain or mist. To
vary the speed setting, turn the
speed control switch.

LO: Normal wiper speed

HI: Fast wiper speed

NOTICE

If there is heavy accumulation of
snow or ice on the windshield,
defrost the windshield for about 10
minutes, or until the snow and/or
ice is removed before using the
windshield wipers to ensure proper
operation. If you do not remove the
snow and/or ice before using the

ODEEV068143NR

ODEEV068144NR