Suzuki Grand Vitara JB627. Manual — part 405
9L-3 Paint / Coatings:
Dash Panel and Front Floor Panel
I6JB019C0003-01
“A”: Apply sealant.
“E”: Flatten sealant.
“B”: Fill gap / hole with sealant.
1. 88 mm (3.46 in.) diameter
“C”: Smooth out sealant with a brush.
2. 60 mm (2.36 in.) diameter hole
“D”: Do not apply sealant.
Paint / Coatings: 9L-4
Front and Rear Door Panels
I6JB019C0004-01
“A”: Apply sealant.
“D”: Wipe off sealant so as not to protrude from this surface.
“a”: Min. 6 mm (0.24 in.)
“B”: Wipe off excess sealant after application.
“E”: Do not protrude sealant backward from this line.
“b”: Max. 3 mm (0.12 in.)
“C”: Do not fill up drain hole.
“F”: Do not protrude sealant outside from this line.
9L-5 Paint / Coatings:
Rear End Door Panel and Hood Panel
I6JB019C0005-01
“A”: Apply sealant.
“a”: Min. 6 mm (0.24 in.)
“B”: Apply wide sealant.
“b”: Max. 3 mm (0.12 in.)
“C”: Apply sealant covering flange end.
Paint / Coatings: 9L-6
Rear Structure Panel
I5JB0A9C0007-04
“A”: Apply sealant.
“C”: Do not apply sealant.
“E”: Apply masking tape
“B”: Smooth out sealant with a brush.
“D”: Flatten sealant
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст