BEFORE DRIVING
Instantaneous fuel consumption
You can select when the value of average
Driving range
If you selected instantaneous fuel con-
fuel consumption is reset from among the
If you selected driving range the last time
sumption the last time you drove the vehi-
following three methods;
you drove the vehicle, the display indicates
cle, the display does not show the bar
• Reset after refuel: the value of average
“---” for a few seconds and then indicates
graph when the ignition switch is turned to
fuel consumption will be reset automati-
the current driving range when the ignition
the “ON” position. The display shows the
cally by refueling.
switch is turned to the “ON” position.
bar graph only when the vehicle is moving.
• Reset with trip A: the value of average
The driving range shown in the display is
fuel consumption will be reset automati-
the approximate distance you can drive
Average fuel consumption
cally by resetting trip meter A.
until the fuel gauge indicates “E”, based on
If you selected average fuel consumption
• Reset manually: the value of average
current driving conditions.
the last time you drove the vehicle, the dis-
fuel consumption will be reset by push-
play shows the last value of average fuel
ing and holding the MODE/ILL knob (2)
When the remaining fuel in fuel tank
consumption from previous driving when
when the display indicates the average
reaches a low level, the display “---” will
the ignition switch is turned to the “ON”
fuel consumption.
appear.
position. Unless you reset the value of
If the low fuel warning light comes on, fill
average fuel consumption, the display indi-
To change when the value of average fuel
the fuel tank immediately regardless of the
cates the value of average fuel consump-
consumption is reset, refer to
“Setting
value of driving range shown in the display.
tion
which includes average fuel
Mode” later in this section.
As the driving range after refueling is cal-
consumption during previous driving.
culated based on the most recent driving
NOTE:
condition, the value is different each time
NOTE:
If you add only a small amount of fuel
you refuel.
When you reconnect the negative (-) ter-
when you select “Reset after refuel”, the
minal to the battery, the value of average
average fuel consumption value may not
NOTE:
fuel consumption will be shown after driv-
be reset.
• If you refuel when the ignition switch is in
ing for a while.
the “ON” position, the driving range may
not indicate the correct value.
• When you reconnect the negative (-) ter-
minal to the battery, the value of driving
range will be shown after driving for a
while.
2-69
79K21-03E
BEFORE DRIVING
Average speed
Odometer/Trip meter/Thermometer
Odometer
If you selected average speed the last time
When the ignition switch is turned to the
The odometer records the total distance
you drove the vehicle, the display indicates
“ON” position, the display (C) shows one of
the vehicle has been driven.
the last value of average speed from previ-
the following three indications, trip meter A,
ous driving when the ignition switch is
trip meter B and thermometer. Also, the
CAUTION
turned to the “ON” position. Unless you
display (D) shows the odometer reading.
Keep track of your odometer reading
reset the value of average speed, the dis-
and check the maintenance schedule
play indicates the value of average speed
EXAMPLE
regularly for required services.
which includes average speed during pre-
Increased wear or damage to certain
vious driving.
(f)
(i)
parts can result from failure to per-
To reset the value of average speed, push
form required services at the proper
and hold the MODE/ILL knob (2) for about
mileage intervals.
(g)
2 seconds when the display indicates an
average speed. The display shows “---”
Trip meter
and then indicates a new average speed
The trip meter can be used to measure the
after driving for a short time.
(h)
distance traveled on short trips or between
fuel stops.
NOTE:
You can use the trip meter A or trip meter B
When you reconnect the negative (-) ter-
independently.
minal to the battery, the value of average
79K122
To reset the trip meter to zero, push and
speed will be shown after driving for a
while.
(f) Trip meter A
hold the TRIP knob (1) for about 2 seconds
(g) Trip meter B
when the display shows the trip meter.
(h) Thermometer
(i) Odometer
To switch the display indication (C), push
the TRIP knob (1) quickly.
2-70
79K21-03E
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BEFORE DRIVING
Thermometer
Setting Mode
The thermometer indicates the outside
EXAMPLE
temperature.
EXAMPLE
79K069
79K068
NOTE:
When the ignition switch is in the “ON”
Current settings appear with reversed text
79K067
position and the vehicle is stationary, you
and background colors.
If the outside temperature nears freezing,
can enter the setting mode of the informa-
the message shown in the above illustra-
tion display by pushing and holding the
NOTE:
tion will appear on the display.
MODE/ILL knob (2) for more than 3 sec-
• If you push and hold the MODE/ILL knob
onds.
to enter the setting mode when the dis-
NOTE:
play (B) shows average fuel consump-
• To select the setting that you want to
The outside temperature indication is not
tion or average speed, the value will be
change, turn the MODE/ILL knob (2) left
the actual outside temperature when driv-
reset simultaneously. If you do not want
or right.
ing at low speed, or when stopped.
to reset the value, push the MODE/ILL
• To change the setting, push the MODE/
knob quickly to switch the indication of
ILL knob (2).
the display.
• To exit the setting mode, select “Back”
• If you turn the ignition switch or start to
and push the MODE/ILL knob (2).
move the vehicle when the display
shows the setting mode, the setting
mode will be canceled automatically.
2-71
79K21-03E
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BEFORE DRIVING
Distance units
Warning and Indicator Messages
the message will appear again after 5
You can change the units odo/trip meter
The display shows the warning and indica-
seconds.
distance is displayed in.
tor messages to let you know about certain
vehicle problems.
NOTE:
A tone may also sound to alert you.
When you change the units odo/trip meter
If warning and indicator messages appear
distance is displayed in, the trip meter will
on the display, follow the messages.
be reset automatically.
Master warning indicator
Fuel economy units
You can change the units that fuel con-
sumption is displayed in.
Language
You can change the language of the infor-
mation display.
Avg. fuel economy reset
78K049
You can change when the value of average
When the display shows warning and indi-
fuel consumption is reset.
cator messages, the master warning indi-
cator may also come on or blink.
Temperature units
You can change the units that temperature
NOTE:
is displayed in.
• When the problem that causes a mes-
sage to appear is corrected, the mes-
NOTE:
sage will disappear.
When you change the units that tempera-
• If a message is displayed, and other
ture is displayed in, the air conditioning
problems requiring a message occur, the
system temperature display units will be
message for each of the problems will be
changed automatically.
alternately displayed about every 5 sec-
onds.
Default setting
• When you push and hold the MODE/ILL
If you select “YES” and push the MODE/
knob for about 2 seconds while a mes-
ILL knob (2), all settings will be reinitial-
sage is displayed, the message will dis-
ized.
appear temporarily. If the problem that
caused the message is not corrected,
2-72
79K21-03E
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BEFORE DRIVING
Warning and Indicator messages
Master Warning
Warning and Indicator message
Sound
Cause and Remedy
Indicator
Blinks
Ding
Any door (including the tailgate) is open when the vehicle
is moving.
Close all doors completely.
79K070
Off
Off
Any door (including the tailgate) is open when the vehicle
is stopped. (#1)
Close all doors completely.
79K070
Blinks
Ding
There may be a problem with the ESP® system.
Have your vehicle inspected by an authorized SUZUKI
dealer.
79K071
Blinks
Ding
There may be problem with the hill descent control sys-
tem and the hill hold control system.
Have your vehicle inspected by an authorized SUZUKI
dealer.
79K072
Blinks
Continuous
Front position lights, license plate lights, instrument lights
Beep
and/or head lights are left on.
Turn the lighting switch to the “OFF” position.
79K073
(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.
2-73
79K21-03E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст