Suzuki Grand Vitara JB416 / JB420. Manual — part 428
10E-17 Keyless Start System:
Reference waveform No. 1
Driver, passenger and rear end door antenna request
signals (Request signal (1) transmitted by each door
antenna when each door request switch is pushed)
Reference waveform No. 2
Center antenna signal
(Request signal (1) transmitted by center antenna when
each door request switch is pushed)
Reference waveform No. 3
Luggage room antenna signal
(Request signal (1) transmitted by luggage room
antenna when each door request switch is pushed)
Measurement
terminal
Driver side door antenna
• CH1: “G44-2” to “G44-9”
• CH2: “G44-1” to “G44-9”
Passenger side door antenna
• CH1: “G44-24” to “G44-9”
• CH2: “G44-23” to “G44-9”
Rear end door antenna
• CH1: “G44-4” to “G44-9”
• CH2: “G44-3” to “G44-9”
Oscilloscope setting CH1: 5 V/DIV, CH2: 5 V/DIV
TIME: 40 ms/DIV
Measurement
condition
Request switch of each door is
pushed with remote controller
carried
I4RS0BA50015-02
Measurement
terminal
CH1: “G44-6” to “G44-9”
CH2: “G44-5” to “G44-9”
Oscilloscope setting CH1: 10 V/DIV, CH2: 2 V/DIV
TIME: 20 ms/DIV
Measurement
condition
• Ignition knob switch of steering
lock unit is pushed
• Request switch of each door is
pushed with remote controller
carried
Measurement
terminal
CH1: “G44-8” to “G44-9”
CH2: “G44-7” to “G44-9”
Oscilloscope setting CH1: 10 V/DIV, CH2: 10 V/DIV
TIME: 20 ms/DIV
Measurement
condition
Request switch of each door is
pushed with remote controller
carried
I5JB0AA50024-03
I5JB0AA50025-02
Keyless Start System: 10E-18
Reference waveform No. 4
CAN communication signals for combination meter
(CAN signal communicated between keyless start
control module and combination meter when ignition
switch is turned ON)
Reference waveform No. 5
Steering lock unit signal
(Signal (1) communicated between keyless start control
module and steering lock unit when measurement
condition described below applies)
Reference waveform No. 6
Driver and passenger side door lock switch signals.
(This signal indicates door lock status.)
In case the position of driver and passenger side door
lock is changed from the unlock to the lock.
Measurement
terminal
CH1: “G44-19” to “G44-9”
CH2: “G44-18” to “G44-9”
Oscilloscope setting CH1: 1 V/DIV, CH2: 1 V/DIV
TIME: 40
µs/DIV
Measurement
condition
Ignition switch is at ON position
1. CAN communication line signal (high)
2. CAN communication line signal (low)
Measurement
terminal
CH1: “G44-29” to “G44-9”
Oscilloscope setting CH1: 2 V/DIV
TIME: 10 ms/DIV
Measurement
condition
• Ignition knob switch of steering
lock unit is pushed
• Request switch of each door is
pushed with remote controller
carried
I4RS0BA50018-02
I5JB0AA50026-02
Measurement
terminal
Driver side door lock switch
• CH1: “G42-33” to “G42-9”
Passenger side door lock switch
• CH2: “G42-37” to “G42-9”
Oscilloscope setting CH1: 2 V/DIV CH2: 2 V/DIV
TIME: 1 s/DIV
Measurement
condition
Press lock side of manual door
lock switch
1. Unlock signal
2. Lock signal
I5JB0AA50027-02
10E-19 Keyless Start System:
In case the position of passenger side door lock is
changed from the lock to the unlock when the position of
driver and passenger side door is at the lock
In case the position of driver side door lock is changed
from the lock to the unlock when the position of driver
and passenger side door is at the lock.
In case the position of driver and passenger side door
lock is changed from the lock to the unlock.
Measurement
terminal
Driver side door lock switch
• CH1: “G42-33” to “G42-9”
Passenger side door lock switch
• CH2: “G42-37” to “G42-9”
Oscilloscope setting CH1: 2 V/DIV CH2: 2 V/DIV
TIME: 400 ms/DIV
Measurement
condition
Driver door is at lock position and
passenger side door is at unlock
position
1. Lock signal
2. Unlock signal
I5JB0AA50028-02
Measurement
terminal
Driver side door lock switch
• CH1: “G42-33” to “G42-9”
Passenger side door lock switch
• CH2: “G42-37” to “G42-9”
Oscilloscope setting CH1: 2 V/DIV CH2: 2 V/DIV
TIME: 400 ms/DIV
Measurement
condition
Driver door is at unlock position
and passenger side door is at
lock position
1. Lock signal
2. Unlock signal
Measurement
terminal
Driver side door lock switch
• CH1: “G42-33” to “G42-9”
Passenger side door lock switch
• CH2: “G42-37” to “G42-9”
Oscilloscope setting CH1: 2 V/DIV CH2: 2 V/DIV
TIME: 400 ms/DIV
Measurement
condition
Driver door is at unlock position
and passenger side door is at
lock position
1. Lock signal
2. Unlock signal
I5JB0AA50029-02
I5JB0AA50030-03
Keyless Start System: 10E-20
No DTC Detection After Performing DTC Check
S5JB0AA504022
Wiring Diagram
BLK
G44-9
G44-15
G44-14
G44-16
G44-20
G44-29
G44-30
G44-10
G44-34
G44-11
WHT/BLK
WHT
WHT
RED/BLK
YEL
5V
5V
5V
5V
5V
12V
12V
WHT
RED
WHT
RED
G44-18
G44-19
BLU/RED
BRN/RED
BLK/YEL
BRN/YEL
ORN
G22-3
G22-4
G22-5
G22-2
G22-1
G22-6
G22-7
G22-8
WHT
WHT
G44
[A]
[B]
1
2
3
4
5
6
7
8
9
10
11
14
15
16
36
34 33 32
30 29
24 23
37
18
19
20
WHT
G28-8
G28-10
G28-14
I5JB0AA50013-03
[A]: Keyless start control module connector (viewed from harness side)
3. Steering lock solenoid
7. Combination meter
[B]: To each control module
4. Ignition knob switch
8. Key indicator lamp
1. Keyless start control module
5. Key reminder switch
9. Junction box
2. Steering lock unit
6. Driver side door request switch
10. Junction connector
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст