JAC High end Light Truck. Service Manual — part 2

1. Temp. control knob

3. Air inlet control bar

2. Fan flow knob

4. Air outlet control knob

36

OWNER爷S MANUAL

JAC High end Light Trucks

Air outlet control knob
Use different knobs to regulate the air from the heater, defroster and the air
conditioner, or the air flow out of the ventilation outlet.
淤Plane air outlet
于Dual planes
盂Bottom air outlets
榆Bottom air outlet and defroster
虞Defroster

Plane air outlet
Air is regulated when it passes the system, and is vented from the upper air outlet.
This position is used for most of the air conditioning cases.

37

38

Dual planes
Air is regulated and discharged from the upper air outlet and floor air outlet. The
air out of the floor air outlet is warmer than that from the upper air outlet in the
range of dual planes. But when the temperature control knob is turned to "
Warmest" or "Coldest", the air from the floor air outlet is the same as that from
the upper air outlet.

Bottom air outlet
Air is discharged from the bottom air outlet.

OWNER爷S MANUAL

JAC High end Light Trucks

Bottom air outlet and defroster
Air is discharged from the bottom air outlet, and small part of air is discharged
from the air outlets of defroster and the side window defroster.

Defroster
Air is regulated and discharged from the air outlet of the defroster; small part of
air is discharged from the side-window defrosting air outlet. This position is on鄄
ly recommended for heavy fog and freezing.

39

Move this selection rod leftward or rightward to control input of 于 ambient air
and the circulation of the inner air.
Note: Only prolonged circulation of the inner air will make the windshield
blurred. For the sake of good ventilation, it is better to exchange with the air
from outside.

Temperature control knob
Turning this control knob may control the inside temperature within the range of
temperatures indicated on the instrument panel.

40

OWNER爷S MANUAL

JAC High end Light Trucks

Fan air flow knob
Turn the knob as per the following to control the air output.
OFF: Fan is powered off.
1. ..Fan is set in low speed range 2. ..Fan is set in medium to low speed
range
3. ..Fan is set in medium to high speed range
4. ..Fan is set in high speed range

Air conditioner switch
Press the "A/C" switch to put the air conditioning system into operation. The
LCD in the switch will be on when the system is under operation. Press this
switch again ,and the air conditioning system is switched off.
If the fan control rod is in off position, instead of any position in the range of fan
speed settings, the system can not be put into operation.

41

CD and Radio

43

CD

44

OWNER爷S MANUAL

JAC High end Light Trucks

Panel function descriptions
1.

噎噎Preset key 1

2.

噎噎Preset key 2

3.

噎噎Preset key 3

4.

噎噎Preset key 4

5.

噎噎Preset key 5

6.

噎噎Preset key 6

1

2
4

3
5

6

7. SOUND 噎噎sound effect mode, sound effect key
8.

Short press: power on; Long press: power off.

9. 噎噎Monitor
10. 噎噎Volume knob. Press up/down to adjust the sound volume; regulate the frequency mode selected.
11. 噎噎OURCE. . .Short press: select the sound source (CD).
BAND. ..Short press: select the wave band
AST. .. Long press: auto storage(CD) . ...Short press: auto storage(cassette)
12.

噎噎Attuning mode(short press: auto search upward / downward; long press: manual search upward/downward

13. 噎噎fast forward
14. 噎噎fast backward
15. 银噎噎Eject key(CD)
16. 噎噎Disc chamber/cassette ch-amber

45

Acoustic apparatus
on/off
Press

for start, and press

over 2 seconds and the master unit is turned off.

Sound volume
Press - or + to adjust the volume.
Mute
Short press

key to enable/disable mute mode.

Sound effect mode
Select the desired type of sound effect as per your personal preference. Press SOUND key to select BASS-TRE, and
press the sound volume key +/- to adjust the type of sound effect.
RND*噎噎CD random play on/off
RPT*噎噎CD repeat on/off
SCN*噎CD music scanning

原BA S -TRE院 auto setting the

BASS or TREoftheapparatus.

原FLAT院Original

原JASS院Jazz music
原VOCAL院Speech
原POP院pop music
原CLSSSIC院classical music
原ROCK院rock & roll music

46

OWNER爷S MANUAL

JAC High end Light Trucks

Acoustic mode setting
Press SOUND key to select the item you want to adjust.
Again press +/- key to adjust the item selected.
Five seconds later the screen turns back to the previous mode.
Only with BASS-TRE selected as the sound effect mode, can BASS and TRE
settings be adjusted.

Sound source selection
Press SOURCE key to select the desired sound source.
When a cassette is inserted in, the sound source will be automatically changed from radio to cassette play. Please take
out cassette when you want to listen to radio, so as to protect the unit.
Radio
Wave band
Press the BAND key to select the wave band desired.

原Sound effect type院渊BAS-TRE袁FLAT袁

JASS袁VOCAL袁POP袁CLSSSIC袁ROCK冤
原BASS院deep sounding

原TREBLE院high pitch

原BLANCE院balance on left and right

原BLANCE院balance on left and right

原BLANCE院balance on left and right

原Radio
原CD/Cassette*

47

48

Auto search
Press Button

or

to auto search the radio stations.

Press

or

key tune to the radio stations of low frequency, or press key

to tune to the radio stations of high fre鄄

quency.
You may press the same key if you want to search for another radio station.
Manual search (if you know the frequency of the radio station you need)
Long press Key or

for about 2 seconds before entry of manual search. Press Key for search of low-frequency ra鄄

dio stations.
Press for search of high frequency radio stations (If there is no search in 5 seconds, the system will return to the previ鄄
ous operation state).
Preselected radio stations (stored or preselected)
Manual storage of radio stations in preset keys
Use the preset keys (1-6) to store 6 radio stations in each wave band. Tune to the radio station desired, and press the
preset key needed (1-6) for 2 seconds at least, and the radio station available now can be stored into this preset key.
Call back the presetting
Press the preset key needed (1-6), the preset radio station will be called out.
Auto storage of radio stations
This function can auto store 6 FM radio stations(with most powerful signals) in the FMAST wave band or 6 MW(AM) radio
stations

OWNER爷S MANUAL

JAC High end Light Trucks

(With most powerful signals) in the MW (AM) wave band. When this auto storage function is used for new radio stations,
new radio stations will take the place of those stored previously in FMST or MW (AM)AST waveband.
Press AST key to activate the auto storage function.
The main unit gives out "beep" before muteness.
"Beep" can be heard after the storage is over.
Sometimes less than 6 radio stations can be found.
CD play *(CD)
Put the disc (printed side up)into the disc chamber and the play begins.
If a disc is already in the chamber, press the SOURCE key to select CD as the source. Play begins.
Previous/next music
Press Key 3 or 4 to select the music desired. Play begins with the music selected.
Music fast forward/backward
Press Key 3 for more than 2 seconds to drive the disc fast forward or fast backward. Release the key and the normal play
will go on.
Random play
Press RND key for at least 2 seconds to activate/quit Random play.
Repeated play
Repeat the play of the present music. Press RPT key for at least 2 seconds to activate/quit the Repeated play.
Music scan
This function can scan each of the music pieces for several seconds. Press the SCN key to activate/quit the Music scan

49

50

function.
Disc eject (CD)
Press the 银 key to eject the disc.
Change over the display mode(CD)
Press FUNC key to select the DIS menu.
Press the DIS key and you may have display changeover among the music number/played time, total music time/total
music numbers, sound effect mode and clock mode.
Display mode changeover(multi-disc CD)
Press FUNC key to select the DIS menu.
Press the DIS key and you may have display changeover among the music number/played time, total music time/total
music numbers, sound effect mode and clock mode.
Troubleshooting
If you find some of the functions of the acoustic apparatus in your vehicle do not work any more, you'd better do a careful
reading of the instructions in the manual before having it repaired, and do a check against the list below. And this will be
helpful to you in troubleshooting. If the trouble cannot be removed still, please send it to the maintenance station for re鄄
pair. Do not dismantle and repair it by yourself.

OWNER爷S MANUAL

JAC High end Light Trucks

51

Before driving

Proper maintenance and driving can prolong the vehicle service life, but also improve the economy of fu鄄
el consumption. Please drive your vehicle carefully.

Operation of controllers
Key
This key is used to operate the startup switch and door lock. Each key is
carved with a number, and kept in a safe place. Do not leave it in the vehicle.

Outer door-handle
Pull outward the outer door-handle and the door is opened.
Insert the startup switch key into the door lock and take a turn, the door can be
locked.

52

OWNER爷S MANUAL

JAC High end Light Trucks

Door lock (outside)
The vehicle doors can be locked, from outside without the key, by pressing the
lock pin (on the inside of the door) in "LOCK" position, and pull outward the
outer door-handle, and the door is locked.

Inner door-handle
Pull out the inner door-handle and the door is opened.

53

Door lock(inside)
Close the door, press in the lock pin in position, and the door can be locked.
Before driving, make sure that the doors are securely closed and locked, espe鄄
cially in case of kids sitting inside.

Driver's seat
Adjusting rod A: move this adjusting rod to the left to slide the chair back and
forth.
B院Pull this adjusting rod up to adjust the chair back.
Do not adjust the driver's seat, because any sudden move may bring the vehi鄄
cle out of the control by the driver.

54

OWNER爷S MANUAL

JAC High end Light Trucks

Pull the back tilting handle, the co driver's chair back tilts down; lift the back to
turn over backward and the back will automatically comes back to its normal
position and gets locked automatically.
Before driving,make sure that the doors are securely closed and locdke,espe鄄
cially in case of kids sitting inside.

Pull the auxiliary back tilting handle, the aux. back may lean down; lift the back
and turn it over backward, and the back will automatically comes back to its nor鄄
mal position and gets locked automatically.

55

seat belt
Front seat belt
In your vehicle, there is a seat belt, supported at 3 pivots. It can be used as
waist belt as well as shoulder belt.
Please refer to the following information about the seat belt use for correct
abidance by.
1援Adjust the seat to the comfortable position for the driver, with the chair back
against the driver's body.

2援Holding the seat belt by its snap piece (L), pull tight the seat belt across the
body. Then pull the snap piece and the belt to the snap position (B), and insert
it into the opening, till a "click" is heard.

56

OWNER爷S MANUAL

JAC High end Light Trucks

It is important to have the seat belt secured against the body and lowered in
position, because at the moment of traffic collision, the force from the waist belt
will be distributed around the pelvis major instead of the belly. If the seat belt is
not tightened, serious injury will occur in case of traffic accident.
The seat belt across the waist should be pushed down as close as possible to
the pelvis major. Then, pull tight the shoulder belt that goes through the snap
opening, to have the seat belt stay against the waist. In this way, the driver will
less likely slip off the belt in case of traffic accident. If the positioning buckles
(K) bulge again st the snap piece when pulling the belt, the positioning buckle
should be moved towards the door near the seat.

To avoid injury from traffic accident, it is forbidden for 2 persons to share one
seat belt at the same time. Try to avoid the seat belt damage due to twist or
clamp in the door.
The shoulder seat belt for the front seat is provided with so -called "Vehicle
pick-off retractor". It is so designed that the safety belt gets tightened only in
case of emergency braking or collision, while the belt can slide freely along with
the user during the rest of time. The seat belt can be released if the button
amid the snap is pressed.

57

When not used, the seat belt can be rolled into the retractor for storage. If needed, the positioning buckle on the belt can
be moved to have the seat belt fully rolled into the retractor. At this time the snap piece is hung at the door column within
reach.

Inspection and maintenance of the seat belt

元Check the seat belt, snap buckle, snap piece and retraction device on a reg鄄
ular basis. Check the support for any damage, to avoid decrease of its safety
effect.
元 Keep sharp-edged articles away from the seat belt to avoid any possible
damage to the belt.
元Change the seat belt if cuts, cracks, slackness or damaged by collision load.
元 Check if the fixing bolts for the support are securely tightened in the floor
pan.
元Change any parts that are found with problems.
元Keep the seat belt clean and dry.
元Wash it only with weak alkaline soapy solution and warm water.
元The seat belt should not be bleached and dyed, or its safety strength will be
weakened.

58

OWNER爷S MANUAL

JAC High end Light Trucks

Mirror
Interior rear-view mirror
The rear-view mirror can be moved back and forth or left and right for adjust鄄
ment.

Door mirrors
The door mirrors on the left and right sides can be adjusted manually in the ar鄄
row direction.

59

Daily check list for drivers
Drivers should do the daily check of the following to ensure safe and reliable
operability of the vehicles.
(Please refer to the Section" Maintenance" for correct checking steps)

Exterior
1. Check the tires for correct pressures, any damage or leakage.

2. Check each of the tires for any looseness.

60

OWNER爷S MANUAL

JAC High end Light Trucks

3. Check the leaf springs and lifting lug pins for any damage.

4. Check if all the lights work normally.

61

5. Check if the battery electrolyte is OK or not.
The normal level should be between "MIN" and "MAX".
(Note: 1.blind plug; 2.MAX; 3.MIN)

6. Check for any leakage of the engine oil, cooling water, fuel oil,
and brake fluid.

62

OWNER爷S MANUAL

JAC High end Light Trucks

Bacdlash play

Cabin
1. Check if the backlash play of the steering wheel is normal or loose.

2. Check the braking effect of the brake.
Step on the brake pedal to see if the brake response time and braking effect
are OK.

63

3. Check the windshield wiper and washer
Prior to check, wash the windshield first. Then eject the cleaning liquid to see if
it is correctly sprayed onto the glass, and make sure the wiper works normally
at each of the modes.

4. Check the cleaning liquid storage.
Check the cleaning liquid storage for the windshield, and add more liquid as
needed.

64

OWNER爷S MANUAL

JAC High end Light Trucks

5. Check if the oil level in the fuel tank, indicated by the fuel gauge, is normal
or not.

6. Check if all the door mirrors and rear-view mirror are correct in angles.

65

7. Check if the clutch pedal has correct back play and height, and if it works
OK.

8. Check if the clutch fluid level and the brake fluid level in the fluid reservoir
are OK or not.

66

OWNER爷S MANUAL

JAC High end Light Trucks

9. Check if all the instruments and indicator lights work correctly.

10. Check if the door locking system works normally.

67