BMW 135i Convertible (2013 year). Manual in english — page 6

Practical interior accessories Controls

Lighter

Cigarette lighter socket

To access the socket:

Open the front ashtray and remove the ciga-

rette lighter or cover from the socket.

In the center console

To access the socket, refer to External devices

on page 177.

With the engine running or the ignition switched

Coupe: through-loading

on, press in the cigarette lighter.

system

The lighter can be pulled out as soon as it pops

back out.

Opening

Hold or touch the hot cigarette lighter by

the knob only. Holding or touching it in

other areas could result in burns.

When leaving the car, always switch off the

ignition and remove the remote control so that

children cannot operate the cigarette lighter

and burn themselves.<

Connecting electrical

1. To release the rear seat backrest, pull the

appliances

corresponding lever in the trunk.

2. The unlocked rear seat backrest moves for-

In your BMW, when the engine is running or the

ward slightly. Fold the backrest forward by

ignition is switched on, you can use electrical

the head restraint.

devices such as a hand lamp, car vacuum

cleaner, etc. if at least one of the following

sockets is available.

The total load of all sockets should not exceed

140 watts at 12 volts.

Avoid damaging the sockets by attempting to

insert plugs of unsuitable shape or size.

Do not connect battery chargers to the

sockets built into the vehicle at the plant;

doing so may damage the vehicle.<

Reinsert cigarette lighter or socket cover

Closing

after use; otherwise items that fall into the

Return the rear seat backrest to the upright

cigarette lighter receptacle or the socket can

seating position and engage it.

cause a short circuit.<

When returning the backrest into the

seating position, make sure that the

seat's locking mechanism is properly engaged.

117

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Controls Practical interior accessories

Otherwise, cargo could be thrown around and

Coupe: ski bag

endanger the occupants in the event of sharp

The ski bag is designed for safe, clean transport

braking or swerving.<

of up to 4 pairs of standard skis or up to

The lashing eyes in the trunk provide you with a

2 snowboards.

way to attach trunk nets or draw straps for

With the ski bag you can stow skis with a length

securing suitcases and luggage, refer to

of up to 6.6 ft/2.0 m. When skis of 6.6 ft/2.0 m

page 127.

length are loaded, the overall capacity of the ski

bag is reduced due to its tapered design.

Convertible: cargo loading

Loading

Enlarging the trunk

Ensure that the skis are clean when they are

loaded into the ski bag. Wrap sharp edges to

prevent damage.

Fold down the center panel in the rear seat

backrest.

Press the button, reach into the recess and

fold down the cover. To stabilize the cover

in the folded-down position, place the

center panel underneath it.

When the convertible top is closed you can

enlarge the trunk:

To do so, fold the trunk partition upward.

Before opening the convertible top, pull the

trunk partition down until it engages.

Ensure that pointed objects do not press

against the trunk partition from below.

The convertible top can only be opened

when the trunk partition is folded down.<

Open the Velcro fastener, spread the ski

bag between the front seats and insert the

skis or snowboards.

Storage compartments inside

Attach the hook of the ski bag retaining

strap to the eyelet on the side of the ski bag

the trunk

opening.

Depending on your vehicle's equipment, the left

side trim panel of the trunk will contain a rubber

strap for securing small objects such as a fold-

ing umbrella.

The lashing eyes in the trunk provide you with a

way to attach trunk nets or draw straps for

securing suitcases and luggage, refer to

page 128.

118

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Practical interior accessories Controls

Securing cargo

Convertible: through-loading

opening with integrated

transport bag

The transport bag is designed for safe, clean

transport of up to 4 pairs of standard skis or up

to 2 snowboards.

With the transport bag you can stow skis up to a

length of 6.6 ft/2.0 m. When skis of 6.6 ft/2.0 m

length are loaded, the overall capacity of the ski

bag is reduced due to its tapered design.

After loading, secure the ski bag and its

contents. Tighten the retaining strap on the

When using the transport bag, it is not

tensioning buckle for this purpose.

permissible to transport passengers in

the rear seats.<

Secure the ski bag in the manner

described; otherwise, it could endanger

Loading

the car's occupants, e.g. in case of heavy brak-

ing or sudden swerving.<

1. Pull the grip in the filler piece of the rear

backrest up and take out the filler piece.

To store the ski bag, perform the steps

described for loading in reverse order.

2. Place the filler piece onto the seat cushion

with the backrest side facing up.

Removing the ski bag

The ski bag can be completely removed, e.g. for

faster drying or to allow you to use other inserts.

3. In the trunk: press the two recesses

together and fold down the cover.

1. Fold down the center panel in the rear seat

backrest.

2. Pull the handle, arrow 1.

3. Pull out the insert, arrow 2.

For more information on the various

inserts available, contact your BMW

center.<

119

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Controls Practical interior accessories

4. Release the strap, lay out the transport bag

between the front seats and load it.

The zip fastener makes objects in the ski

bag easier to reach.

Ensure that the skis are clean when you load

them into the transport bag. Wrap sharp edges

to prevent damage.

Securing cargo

After loading, secure the transport bag and its

contents. Tighten the retaining strap on the

tensioning buckle for this purpose.

Secure the transport bag in the manner

described; otherwise, it could endanger

the car's occupants, e.g. in case of heavy brak-

ing or sudden swerving.<

To store the transport bag, perform the steps

described for loading in reverse order.

120

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Driving tips

This section provides you with information

useful in dealing with specific driving and

operating conditions.

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Driving tips Things to remember when driving

Things to remember when driving

Vehicle equipment

Brake system

Brakes require an initial break-in period of

In this chapter, all production, country, and

approx. 300 miles/500 km to achieve optimized

optional equipment that is offered in the model

contact and wear patterns between brake pads

range is described. For this reason, descrip-

and rotors. Drive cautiously during this break-in

tions will be given of some equipment that may

period.

not be available in a vehicle, for example due to

the special options or national-market version

Clutch

selected. This also applies to safety related

functions and systems.

The function of the clutch reaches its optimal

level only after a distance driven of approx.

300 miles/500 km. During this break-in period,

engage the clutch gently.

Break-in period

Moving parts need breaking-in time to adjust to

Following part replacement

each other. Please follow the instructions below

The same break-in procedures should be

in order to achieve the optimal service life and

observed if any of the components mentioned

economy of operation for your vehicle.

above have to be renewed in the course of the

vehicle's operating life.

Engine and differential

Always obey all official speed limits.

Saving fuel

Up to 1,200 miles/2,000 km

The fuel consumption of your vehicle depends

Drive at varying engine and road speeds, but do

on several factors. You can lower fuel consump-

not exceed an engine speed of 4,500 rpm or a

tion and the environmental impact by taking

road speed of 100 mph/160 km/h.

certain measures, adjusting your driving style

Avoid full-throttle operation and use of the

and having the vehicle serviced regularly.

transmission's kickdown mode.

Remove any unneeded cargo

After driving 1,200 miles/2,000 km

Additional weight increases fuel consumption.

Engine and vehicle speeds can be gradually

increased.

Remove any mounted parts after you

have finished using them

Tires

Remove unneeded additional mirrors, the roof

Due to technical factors associated with their

rack and the rear luggage rack after use.

manufacture, tires do not achieve their full

Mounted parts affect the vehicle's aerodynam-

traction potential until after an initial break-in

ics and increase fuel consumption.

period. Therefore, drive cautiously during the

first 200 miles/300 km.

Close the windows and glass roof

An open glass roof or window causes higher

air resistance and thus increases fuel

consumption.

124

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Things to remember when driving Driving tips

Check tire inflation pressure regularly

Switch off the engine during lengthy

Check the tire inflation pressure at least twice a

stops

month and before embarking on a long journey,

Switch off the engine when stopping for lengthy

and correct it if necessary.

periods, e.g. at traffic lights, railroad crossings

or in traffic congestions.

Low tire inflation pressure causes higher rolling

resistance and thus increases fuel consumption

and tire wear.

Switch off functions you do not need at

the moment

Set off immediately

Functions such as the air conditioner, seat

heating or rear window defroster draw large

Do not let the engine warm up while the car is

amounts of power and consume additional fuel.

still standing, but set off immediately at moder-

Especially in city traffic and in stop-and-go driv-

ate engine speed. This is the fastest way for the

ing they have a considerable impact. Therefore,

cold engine to reach its operating temperature.

switch these functions off when they are not

really needed.

Drive defensively

Avoid unnecessary acceleration and braking

Have the vehicle serviced

maneuvers. To do so, keep an adequate dis-

Have the vehicle serviced regularly to achieve

tance between you and the vehicle in front of

good economy and a long vehicle life. BMW

you. A defensive and smooth driving style

recommends having the vehicle serviced at

keeps fuel consumption down.

your BMW center. Also note the BMW Mainte-

nance System, refer to page 237.

Avoid high engine speeds

Use first gear only for driving off. In second and

higher gears, accelerate without hesitation or

General driving notes

pauses. When accelerating, shift up before

reaching high engine speeds.

Close the trunk lid

When you reach the desired speed, shift into

Only drive with the trunk closed. Failure to

the highest applicable gear and drive with the

do so may endanger passengers or other

engine speed as low as possible and at a con-

road users or may damage the vehicle in the

stant speed.

event of an accident or a braking and evasive

As a rule: driving at low engine speeds lowers

maneuver. In addition, exhaust gas may flow

fuel consumption and reduces wear.

into the passenger compartment.<

If special circumstances make it absolutely

Coasting

necessary to drive with the trunk open:

When approaching a red light, take your foot off

1. Close all windows and the glass roof.

the accelerator and coast to a stop in the high-

est applicable gear.

2. Greatly increase the air volume of the

automatic climate control system, refer to

On a downhill slope, take your foot off the accel-

page 108.

erator and coast in a suitable gear.

3. Drive cautiously.

The fuel supply is interrupted when coasting.

125

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Driving tips Things to remember when driving

Hot exhaust system

Use the parking brake on inclines

In all vehicles, extremely high tempera-

On inclines, do not hold the vehicle for a

tures are generated in the exhaust sys-

lengthy period using the clutch; use the

tem. Do not remove the heat shields installed in

parking brake instead. Otherwise, greater

its vicinity, and never apply undercoating to

clutch wear will result.<

them. When driving, standing at idle and while

For more information about the drive-off

parking, take care to avoid possible contact

assistant, refer to page 90.

between the hot exhaust system and any highly

flammable materials such as hay, leaves, grass,

Braking safely

etc. Such contact could lead to a fire, with the

Your BMW is equipped with ABS as a standard

risk of serious personal injuries and property

feature. Applying the brakes fully is the most

damage. Do not touch hot exhaust tail pipes.

effective way of braking in situations in which

Otherwise, there is a risk of burns.<

this is necessary. Since the vehicle maintains

steering responsiveness, you can still avoid

Mobile phones in the vehicle

possible obstacles with a minimum of steering

It is not advisable to use wireless devices

effort.

such as mobile phones inside the vehicle

Pulsation of the brake pedal, combined with

without a direct connection to an external aerial.

sounds from the hydraulic circuits, indicate that

Otherwise, it is not possible to exclude the pos-

ABS is in its active mode.

sibility of a reciprocal interference occurring

between the vehicle electronics and the wire-

Objects in the movement range of the

less device. Otherwise, there is no assurance

pedals

that the radiation generated by the radio trans-

mission will be conveyed out of the passenger

Keep floor mats, carpet, and other objects

compartment.<

out of the movement range of the pedals;

otherwise, they may inhibit the function of the

pedals during driving.

Hydroplaning

Do not place additional floor mats onto an

When driving on wet or slushy roads,

existing one or onto other objects.

reduce road speed. If you do not, a wedge

Only use floor mats that have been approved for

of water can form between tires and road sur-

the vehicle and can be appropriately fastened.

face. This situation, known as hydroplaning,

Make sure that the floor mats are securely

means that the tire can completely lose contact

fastened again after they have been removed,

with the road surface, so that neither the car can

e.g. for cleaning.<

be steered nor the brake be properly applied.<

The risk of hydroplaning increases with

Driving in wet conditions

declining tread depth on the tires, refer also to

When roads are wet or there is heavy rain,

Minimum tread depth on page 229.

briefly exert gentle pressure on the brake pedal

every few miles. Monitor traffic conditions to

Driving through water

ensure that this maneuver does not endanger

Drive through water on the road only if it is

other road users. The heat generated in this

not deeper than 1 ft/30 cm, and then only

process helps dry the pads and rotors. Full

at walking speed at the most. Otherwise, the

braking efficiency will then be available when

vehicle's engine, the electrical systems and the

you need it.

transmission may be damaged.<

126

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Things to remember when driving Driving tips

Hills

When the vehicle is parked

To prevent overheating and the resulting

Condensation forms while the automatic

reduced efficiency of the brake system,

climate control is in operation, and then exits

drive long or steep downhill gradients in the

under the vehicle. Traces of condensed water

gear in which the least braking is required. Even

under the vehicle are therefore normal.

light but consistent brake pressure can lead to

high temperatures, brake wear and possibly

even brake failure.<

Cargo loading

You can increase the engine's braking effect

To avoid loading the tires beyond their

by shifting down, all the way to first gear if nec-

approved carrying capacity, never over-

essary. This strategy helps you avoid placing

load the vehicle. Overloading can lead to over-

excessive loads on the brake system. Down-

heating and increases the rate at which damage

shifting in manual mode of the automatic

develops inside the tires. In some situations,

transmission, refer to page 65.

this can result in sudden loss of tire pressure.<

Sport automatic transmission with double

Avoid fluid spills in the trunk as they could

clutch: never drive with the transmission

damage the vehicle.<

in neutral or with the engine switched off; other-

wise, there will be no engine braking action and

Determining loading limit

no power assistance to the brakes and steering.

Manual transmission: never drive with the

clutch held down, with the transmission in neu-

tral or with the engine switched off; otherwise,

there will be no engine braking action and no

power assistance to the brakes and steering.

Never allow floor mats, carpets or any other

objects to protrude into the area around the

pedals; otherwise, pedal function could be

impaired.<

Locate the following statement on your

Corrosion on brake rotors

vehicle's placard:

When the vehicle is driven only occasionally,

The combined weight of occupants

during extended periods when the vehicle is not

and cargo should never exceed

used at all, and in operating conditions where

XXX kg or YYY lbs. Otherwise damage to

brake applications are less frequent, there is an

the vehicle may occur and unstable driving

increased tendency for corrosion to form on

conditions may result.<

rotors, while contaminants accumulate on the

Determine the combined weight of the

brake pads. This occurs because the minimum

driver and passengers that will be riding in

pressure which must be exerted by the pads

your vehicle.

during brake applications to clean the rotors is

not reached.

Subtract the combined weight of the driver

and passengers from XXX kilograms or YYY

Should corrosion form on the brake rotors, the

pounds.

brakes will tend to respond with a pulsating

effect that even extended application will fail to

The resulting figure equals the available

cure.

amount of cargo and luggage load capacity.

For example, if the YYY amount equals

127

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Driving tips Things to remember when driving

1,400 lbs and there will be five 150-lb

Convertible

passengers in your vehicle, the amount of

available cargo and luggage load capacity is

650 lbs:

1,400 lbs minus 750 lbs = 650 lbs.

5. Determine the combined weight of luggage

and cargo being loaded on the vehicle. That

weight may not safely exceed the available

cargo and luggage load capacity calculated

in step 4.

6. If your vehicle will be towing a trailer, part of

Storing cargo

the load from your trailer will be transferred

to your vehicle. Consult the manual for

> Position heavy objects as low and as far

transporting a trailer to determine how this

forward as possible, ideally directly behind

may reduce the available cargo and luggage

the respective seat backrests.

load capacity of your vehicle.

> Cover sharp edges and corners.

> For very heavy cargo when the rear seat is

Load

not occupied, secure each safety belt in the

opposite buckle.

Securing cargo

> Secure smaller and lighter items using draw

straps.

> Heavy-duty cargo straps for securing larger

and heavier objects are available at your

BMW center. To attach the cargo straps,

there are two lashing eyes on the inside wall

The permissible load is the sum of the occu-

of the trunk.

pants' weights and the weight of the cargo. The

Comply with the information enclosed with

greater the weight of the occupants, the less

the load-securing devices.

cargo/luggage can be transported.

Always position and secure the cargo as

described above, so that it cannot endan-

Stowing cargo

ger the car's occupants, for example if sudden

braking or swerving is necessary.

Coupe

Never exceed either the approved gross vehicle

weight or either of the approved axle loads, refer

to page 259, as excessive loads can pose a

safety hazard, and may also place you in viola-

tion of traffic safety laws.

Heavy or hard objects should not be carried

loose inside the car, since they could be thrown

around, for example as a result of heavy braking,

sudden swerves, etc., and endanger the

occupants.

128

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Things to remember when driving Driving tips

Only attach the cargo straps using the lashing

Fasten roof-mounted cargo correctly and

eyes shown in the illustration. Do not secure

securely to prevent it from shifting or falling off

cargo with the anchors for tether straps, refer to

during the trip.

page 60, otherwise, these could be damaged.<

Drive smoothly. Avoid sudden acceleration and

braking maneuvers. Take corners gently.

Coupe: roof-mounted

luggage rack

A special rack system is available as an option

for your BMW. Comply with the directions given

in the installation instructions.

Mounting points

Fold open the cover.

Loading roof-mounted luggage rack

Because roof racks raise the vehicle's center of

gravity when loaded, they have a major effect on

vehicle handling and steering response.

You should therefore always remember not to

exceed the approved roof load capacity, the

approved gross vehicle weight or the axle loads

when loading the rack.

You can find the applicable data under Weights

on page 259.

The roof load must be distributed uniformly and

should not be too large in area. Heavy items

should always be placed at the bottom. Be sure

that adequate clearance is maintained for tilting

the glass roof, and that objects do not project

into the opening path of the trunk lid.

129

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Navigation

This chapter describes how you can

enter destinations and specify your route

so that your navigation system guides you

reliably to your destination.

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Navigation Navigation system

Navigation system

Vehicle equipment

Navigation data

In this chapter, all production, country, and

General information

optional equipment that is offered in the model

Navigation data and authorization codes are

range is described. Equipment is also described

available from your BMW center. Navigation

that is not available because of, for example,

data are stored in the vehicle and can be

selected options or country version. This also

updated.

applies to safety related functions and systems.

> Depending on the data volume, a data

update may take several hours.

General information

> Update data while driving to reduce the

drain on the battery.

The navigation system can determine the pre-

cise position of the vehicle, with the aid of satel-

> Only the main functions of the navigation

lites and vehicle sensors, and can reliably guide

system are available during updating.

you to every entered destination.

The update is resumed automatically when a

Enter data only with the vehicle station-

trip is continued after an interruption.

ary, and always give priority to the appli-

> You can inquire as to the status of the

cable traffic regulations in the event of any con-

update.

tradiction between traffic and road conditions

> The data are stored in the vehicle.

and the instructions issued by the navigation

> After the update, the system restarts.

system. Failure to take to this precaution can

place you in violation of the law and put vehicle

> The medium that holds the navigation

occupants and other road users in danger.<

data can be removed after the update is

completed.

Accessing navigation system

Information about navigation data

Press the button.

1. "Navigation"

2. "Navigation"

2. Open "Options".

The navigation system can also be

3. "Navigation system version":

accessed directly with the button on the

Information about the data version is

controller.

displayed.

Updating the navigation data

Inserting navigation DVD

1. Insert the navigation DVD into the DVD

player with the labeled side facing up.

2. Follow the instructions on the Control

Display.

3. Enter the authorization code of the naviga-

tion DVD and change the DVD if needed.

132

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Navigation system Navigation

Removing navigation DVD

1. Press button 1.

The DVD emerges slightly from the drive.

2. Remove the DVD.

Querying status

Press the button.

2. "Navigation update"

133

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Navigation Destination entry

Destination entry

Press the button.

Vehicle equipment

2. "Navigation"

In this chapter, all production, country, and

optional equipment that is offered in the model

3. "Enter address"

range is described. Equipment is also described

that is not available because of, for example,

selected options or country version. This also

applies to safety related functions and systems.

General information

In entering your destination you can select from

the following options:

> Entering a destination manually, see below

The system also supports you with the

> Selecting destination from address book,

following features:

refer to page 136

> If you do not enter a street, the system will

> Last destinations, refer to page 137

guide you to the downtown area of a town or

city.

> Special destinations, refer to page 137

> You can skip the entry of state/province and

> Entering a destination on the map, refer to

town/city if the current entries should be

page 139

retained for your new destination.

> Selecting home address, refer to page 137

> Destination entry via voice, refer to

Entering a state/province

page 140

1. "Navigation"

> Destination entry via BMW Assist, refer to

2. "Enter address"

page 139

3. Select "State/Province" or displayed

You can also store a navigation destination on

country.

the programmable memory keys, refer to

page 25.

Entering a town/city

1. Select "Town/City/Postal Code" or the

displayed town/city.

Entering a destination

manually

To make it easier to enter town/city names and

street names, the system assists you with auto-

matic name completion and entry comparison,

refer to page 143. This makes it possible to

enter different spellings and completes your

entry automatically so that stored town/city

names and street names can be accessed

quickly.

134

Online Edition for Part no. 01402911223 - © 06/13 BMW AG

Destination entry Navigation

2. Select letters, if necessary.

If there are several streets with the same name:

The list is reduced in steps with each entry.

1. Change to the list of street names.

To delete letters:

2. Highlight street.

> To delete individual letters:

3. Select the street.

Turn the controller to select

, and

then press the controller.

Alternative: entering street and house

> To delete all letters:

number

Turn the controller to select

, and

1. Select "Street" or displayed street.

then press the controller for an extended

2. Enter the street the same way you entered

period.

the town/city.

To enter spaces:

3. "House number"

> Select the

symbol.

4. Select the digits.

The list gradually grows smaller each time

5. Change to the list of house numbers.

you enter a new letter.

6. Select a house number or range of house

3. Move the controller to the right.

numbers.

4. Select the name of the town/city from the

list.

No such street at the destination

If there are several towns/cities with the same

The desired street is not in the entered town/

name:

city because it belongs to another district of the

1. Change to the list of town/city names.

town/city.

2. Highlight the town/city.

"Navigation"

3. Select the town/city.

"Enter address"

Select "Street" or displayed street.

Entering the postal code

Change to the list of street names.

1. Select "Town/City/Postal Code" or the

Select "In" displayed country.

displayed town/city.

All streets of the entered country are

2. Select the

symbol.

offered. The corresponding town/city is

3. Select the digits.

displayed after the street name.

4. Change to the list of postal codes and

towns/cities.

5. Highlight the entry.

6. Select an entry.

Entering street and intersection

1. Select "Street" or displayed street.

2. Enter the street and cross-street the same

way you entered the town/city.

Select the letters.

After you enter the street, you can also enter

the cross street or the house number.

Change to the list of street names.

Highlight street.

Select the street.

135

Navigation Destination entry

Starting destination guidance after

Storing a destination in the address

entering the destination

book

1. "Accept destination"

Store the destination in the address book after

entering the destination.

2. "Start guidance" or "Add as another desti-

nation", refer to page 141.

"Navigation"

> Setting "Route preference", refer to

"Map"

page 143.

"Guidance"

> Search for "Points of Interest at loc.", refer

Open "Options".

to page 137.

"Store as new contact" or "Add to existing

contact".

Address book

To create contacts, refer to page 212.

Selecting a destination from the

address book

1. "Navigation"

2. "Address book"

Contacts with addresses are displayed if

these addresses have been checked as

Select an existing contact, if available.

destinations.

"Business address" or "Home address"

If the contacts with addresses from the

"Last name" and "First name" if you wish.

mobile phone are not displayed, they first

need to be checked as destinations, refer to

"Store in vehicle"

page 202.

Storing the position

Your current position can be stored in the

address book.

1. "Navigation"

2. Open "Options".

3. "Store position as contact" or "Add position

to contact".

3. Select a contact in the list or if so desired,

using the "A-Z search".

4. Select "Business address" or "Home

address"

136

Destination entry Navigation

4. Depending on the selection, select an exist-

Opening the last destinations

ing contact from the list or the type of

1. "Navigation"

address and enter the last and first name.

2. "Last destinations"

5. "Store in vehicle"

Editing or deleting an address

1. "Navigation"

2. "Address book"

3. Highlight the entry.

4. Open "Options".

5. "Edit in Contacts" or "Delete entry".

Using the home address as a

3. Select the destination.

destination

4. "Start guidance" or "Add as another

The home address must be created. Specifying

destination"

a home address, refer to page 212.

Editing a destination

1. "Navigation"

Destinations can be edited, for example, to

2. "Address book"

change the house number of an existing entry.

3. "Home"

1. "Navigation"

2. "Last destinations"

3. Highlight the destination.

4. Open "Options".

5. "Edit destination"

Deleting the last destinations

1. "Navigation"

2. "Last destinations"

4. "Start guidance"

3. Highlight the destination.

4. Open "Options".

Last destinations

5. "Delete entry" or "Delete all last

destinations".

The last destinations are stored automatically.

These destinations can be called up and used

as a destination for destination guidance.

Special destinations

General information

Even with the most up-to-date navigation data,

information about certain special destinations

may have changed; for example, filling stations

may not be in operation.

137

Navigation Destination entry

Opening the search for special

If a phone number is available, a connection

destinations

can be established, if desired.

1. "Navigation"

10. Select the symbol.

2. "Points of Interest"

11. "Start guidance" or "Add as another desti-

nation". Adding destination as another

The search can be narrowed by entering the

destination, refer to page 141.

location and type of special destination.

"Start search": without entering a search term,

Searching online

the search is repeated with the last stored

search term.

1. "Google™ Local Search"

2. Select the special destination.

Category search

3. Select the symbol.

"Category search"

4. "Start guidance"

"Town/City"

Select or enter town/city.

Special destination location

"Category"

As you input the search destination, you can

select from among various options.

Select category.

> "At current location"

"Category details"

For some special destinations, it is possible

> "At destination"

to select several category details.

> "At different location"

Move the controller toward the left to exit

> "Along route"

category details.

"Start search"

A-Z search

A list of the special destinations is

"A-Z search"

displayed.

"Town/City"

Select the special destination.

Select or enter town/city.

Details are displayed.

"Category"

If several details are stored, then you can

Select category.

scroll through the pages.

"Category details"

If a phone number is available, a connection

For some special destinations, it is possible

can be established, if desired.

to select several category details.

Select the symbol.

Move the controller toward the left to exit

10. "Start guidance" or "Add as another desti-

category details.

nation". Adding destination as another

"Keyword"

destination, refer to page 141.

Enter keyword.

A list of the special destinations is

Displaying special destinations

displayed.

List of special destinations: the special destina-

Select the special destination.

tions are displayed in order of their distance and

are displayed with a direction arrow pointing

Details are displayed.

toward the destination.

If several details are stored, then you can

scroll through the pages.

138

Destination entry Navigation

With the Professional navigation system:

Selecting the destination

In the split screen, special destinations from the

1. "Navigation"

selected category are displayed as symbols in

2. "Map"

the map view. The display depends on the map

scale and the category.

The current position of the vehicle is displayed

on the map.

Destination entry via BMW Assist

"Interactive map"

A connection to the BMW Concierge service is

established, refer to page 213.

1. "Navigation"

2. "Enter address"

3. Open "Options".

4. "BMW Assist dest. entry"

Displaying special destinations in the

map

Select the destination with the cross-hairs.

To display symbols of the special destinations

in the map:

> To change the scale: turn the controller.

1. "Navigation"

> To shift the map: move the controller in

the required direction.

2. "Map"

> To shift the map diagonally: move the

3. Open "Options".

controller in the required direction and

4. "Display Points of Interest"

turn it.

Press the controller to display additional

menu items.

> Select the symbol: "Start guidance"

or "Add as another destination".

> "Find points of interest": the search for

special destinations is started.

Specifying the street

If the system cannot recognize a street, it dis-

5. Select the settings.

plays one of the following pieces of information:

> A street name in the vicinity.

> The district.

Destination entry via map

> The coordinates of the destination.

If you only know the location of a destination or

street, then you can enter the destination with

Interactive map

the aid of the map.

In the interactive map, the scale can be adjusted

and the visible map section can be shifted. In

addition, pressing the controller makes further

functions available:

139

Navigation Destination entry

> Countries, towns and cities, streets and

intersections can be said as whole words or

spelled in the system language, refer to

page 87.

Example: to enter a destination in a US state

as a complete word, the system language

must be English.

> Spell the entry if the language spoken in the

area is different from the system language.

> Select the symbol.

> Say the letters smoothly, and avoid exag-

"Start guidance" or "Add as another

gerating the pronunciation and inserting

destination"

lengthy pauses between the letters.

> "Exit interactive map":

> The methods of entry depend on the navi-

Go back to the map view.

gation data in use and on the country and

language settings.

> "View in northern direction" or "View in

driving direction"

Entering an address in a command

> "Display destination":

1. Press the

button on the steering wheel.

The section of the map around the

destination is displayed.

{Enter address}

> "Display current location":

3. Wait for a request from the system.

The section of the map around the

4. Say the address aloud in the suggested

current position is displayed.

order.

> "Find points of interest", refer to

5. Continue making the entry as prompted by

page 137.

the system.

If necessary, individually name the separate

components of the address, e.g. the town/city.

Destination entry via voice

Entering a town/city

General information

The town/city name can be spoken as a

For instructions on the voice activation system,

complete word or spelled.

refer to page 27.

With the destination entry menu displayed:

> During the destination entry by voice, you

can switch between voice operation and

1. Press the

button on the steering wheel.

entry via iDrive at any time. To do so,

{City} or {Spell city}.

reactivate the voice activation system if

3. Wait for the system to prompt you for the

necessary.

town/city.

> Having the possible spoken commands

4. Say the name of the town/city or say at least

read aloud: {Voice commands}

the first three letters.

Saying the entries

> With the Professional navigation system:

City/town, street, and house number can be

entered with a single command.

140

Была ли эта страница вам полезна?

Да!Нет

4 посетителя считают эту страницу полезной.

BMW 135i Convertible (2013 year). Manual in english — page 6

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.