BMW 3 (E46). Manual — part 98
manufactured from 08/98 to 03/00 are
equipped with the A5S 360R automatic
transmission. Vehicles produced after
03/00 use the A5S 325Z transmission.
GM manufactured transmissions have
the ID tag located on the left hand side
of the transmission housing, behind the
transmission selector cable, just above
the transmission pan (arrow).
ZF manufactured transmissions have the
ID tags mounted on the left side of the
rear of the transmissions, just above the
automatic transmission pan (arrow).
Table b. Automatic transmission applications
Model
Year
Engine
Transmission
323i/Ci
328i/Ci
1999 - 2000
2000 - 2001
M52TU
GM A5S 360R
ZF A5S 325 Z
325i/Ci
330i/Ci
2000 - 2001
M54
ZF A5S 325 Z
325xi
330xi
2000 - 2001
M54
GM A5S 390R
Transmission lubricants
210-1
General
This repair group covers replacement
of the clutch mechanical and hydraulic
components. Read the procedure
through before beginning a job.
Note:
See
200 Transmission–General
for
transmission application information.
Special tools
The 3 Series BMW employs a
traditional style clutch layout with a self
adjusting clutch for manual
transmission cars. BMW suggests
some specific tools for fitting and
removing the self adjusting clutch
(SAC) assembly. These tools are
required for aligning and assembling
the clutch disk, as well as locking the
flywheel in place and aligning the SAC
assembly to the dual mass flywheel.
Flywheel locking tool BMW 11 2 170
Pilot bearing removal tool BMW 11 2
340
Pilot bearing installation tool BMW 11 2
350
Clutch lining gauge BMW 21 2 080
Clutch centering mandrel BMW 21 2
142
SAC clutch lock tool BMW 21 2 150
Clutch diaphragm tensioning too BMW
21 2 160
SAC tensioning tool BMW 21 2 170
SAC locating ring BMW 21 2 180
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст