BMW 2 Series Convertible (2016 year). Manual in english — page 2
Controls Opening and closing
vated. All settings stored in the profile are au-
Profile management
tomatically applied.
If several drivers use their own remote control,
Opening profiles
the vehicle will adjust the personal settings
Regardless of the remote control in use a dif-
during unlocking. These settings are also re-
ferent profile may be activated.
stored, if the vehicle has been used in the
1. "Settings"
meantime by a person with a different remote
control.
2. "Profiles"
Changes to the settings are automatically
3. Select a profile.
saved in the personal profile.
▷ All settings stored in the called-up profile
Three personal profiles and a guest profile can
are automatically applied.
be created.
▷ The called-up profile is assigned to the re-
mote control being used at the time.
Adjusting
▷ If the profile is already assigned to a differ-
The settings for the following systems and
ent remote control, this profile will apply to
functions are saved in the active profile. The
both remote controls. It cannot be differen-
scope of storable settings is country- and
tiated anymore between the settings for
equipment-dependable.
the two remote controls.
▷
Unlocking and locking.
Renaming profiles
▷
Lights.
A personal name can be assigned to every pro-
▷
Climate control.
file to avoid confusion between the profiles.
▷
Radio.
1. "Settings"
▷
Instrument cluster.
2. "Profiles"
▷
Programmable memory buttons.
3. "Options"
▷
Volumes, tone.
4. "Rename current profile"
▷
Control Display.
▷
Navigation.
Resetting profiles
▷
Park Distance Control PDC.
The settings of the active profile are reset to
▷
Rearview camera
their default values.
▷
Driving Dynamics Control.
1. "Settings"
▷
Driver's seat position, exterior mirror posi-
2. "Profiles"
tion, steering wheel position.
3. "Options"
▷
Cruise control.
4. "Reset current profile"
▷
Intelligent Safety.
Exporting profiles
Most settings of the active profile can be ex-
ported.
This can be helpful for securing and retrieving
personal settings, before delivering the vehicle
to a workshop, e.g. Profiles can be taken to an-
36
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
other vehicle equipped with the Personal Pro-
Display profile list during start
file function.
The profile list can be displayed during each
The following export options are available:
start to select the desired profile.
▷ Via BMW Online.
1. "Settings"
▷ Via the USB port to a USB device.
2. "Profiles"
Popular file systems for USB devices are
3. "Options"
supported. FAT32 and exFAT are the rec-
4. "Display user list at startup"
ommended formats for profile export.
Other formats may not support the export.
1. "Settings"
Using the remote control
2. "Profiles"
3. "Export profile"
Note
4. BMW Online: "BMW Online"
Take the remote control with you
USB interface: "USB device"
People or animals left unattended in a
parked vehicle can lock the doors from the in-
Importing profiles
side. Always take the remote control with you
Profiles exported via BMW Online can also be
when leaving the vehicle so that the vehicle
imported via BMW Online.
can then be opened from the outside.◀
Profiles stored on a USB device can be im-
ported via the USB interface.
Unlocking
Existing settings are overwritten with the im-
Press button on the remote control.
ported profile.
▷ All doors, the tailgate, and the fuel filler flap
1. "Settings"
are being unlocked.
2. "Profiles"
▷ Interior lamps and courtesy lamps are acti-
3. "Import profile"
vated. This function is not available, if the
4. BMW Online: "BMW Online"
interior lamps were switched off manually.
USB interface: "USB device"
▷ The welcome lamps are switched on, if this
function was activated.
Using the guest profile
▷ Exterior mirrors folded through convenient
The guest profile is for individual settings that
closing are folded open.
are saved in none of the three personal pro-
You can set how the vehicle is to be unlocked.
files.
For Settings, refer to page 43.
This can be useful for drivers who are using
The alarm system, refer to page 44, is dis-
the vehicle temporarily and do not have their
armed.
own profile.
1. "Settings"
Convenient opening
2. "Profiles"
Press and hold this button on the re-
mote control.
3. "Guest"
The guest profile cannot be renamed. It is not
assigned to the current remote control.
37
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
The windows are opened, as long as the but-
Releasing the button or leaving the vicinity of
ton on the remote control is pressed.
the vehicle stops the motion.
With Comfort Access, the remote control can
In this case, the convertible top and convertible
be used to open the convertible top when in
top well storage cover will slowly lower after a
the vicinity of the vehicle.
short period of time. The convertible top and
the convertible top well storage cover are not
Press and hold this button on the re-
locked. Press button again until the convertible
mote control until the convertible top
top operation is completed.
is fully opened and the convertible top well
storage cover is fully closed.
The exterior mirrors are folded in.
The exterior mirrors are not folded in when the
Danger of jamming
warning flashers are activated.
Monitor the opening process to ensure
that no one becomes trapped; otherwise, inju-
Monitor closing
ries may result.◀
Monitor closing to ensure that no one
becomes trapped.◀
Leaving the vicinity of the vehicle stops the
motion.
Switching on interior lights and
In this case, the convertible top and convertible
courtesy lights
top well storage cover will slowly lower after a
short period of time. The convertible top and
Press button on the remote control with
the convertible top well storage cover are not
the vehicle locked.
locked. Press button again until the convertible
This function is not available, if the interior
top operation is completed.
lamps were switched off manually.
Locking
If the button is pressed again within 10 sec-
onds after vehicle was locked, the interior mo-
Locking from the outside
tion sensor and tilt alarm sensor of the anti-
Do not lock the vehicle from the outside
theft warning system, refer to page 45, are
with people inside the car, as the vehicle can-
turned off. After locking, wait 10 seconds be-
not be unlocked from inside without special
fore pressing the button again.
knowledge.◀
The driver's door must be closed.
Panic mode
You can trigger the alarm system if you find
Press button on the remote control.
yourself in a dangerous situation.
Press button on the remote control for
All doors, the tailgate, and the fuel filler flap are
at least 3 seconds.
being locked.
The alarm system, refer to page 44, is armed.
To reel off the alarm: press any button.
Convenient closing
Unlocking the trunk lid
With Comfort Access, the convertible top and
Press button on the remote control for
the window can be closed in the vicinity of the
approx. 1 second.
vehicle.
Hold down the remote control button un-
til the closing operation is completed.
38
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
The trunk lid opens slightly, regardless of
▷ LX8766S.
whether the vehicle was previously locked or
▷ LX8766E.
unlocked.
▷ LX8CAS.
Depending on the features and the country
▷ LX8CAS2.
version, it is also possible to have door un-
locked. Create the settings, refer to page 43.
▷ MYTCAS4.
If the doors were not unlocked, the trunk lid is
Compliance statement:
locked again as soon as it closes.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
Do not place the remote control in the
two conditions:
cargo area
▷ This device may not cause harmful inter-
Take the remote control with you and do not
ference, and
leave it in the cargo area; otherwise, the re-
mote control is locked inside the vehicle when
▷ this device must accept any interference
the trunk lid is closed.◀
received, including interference that may
cause undesired operation.
Malfunction
Any unauthorized modifications or changes to
these devices could void the user's authority to
Remote control detection by the vehicle can
operate this equipment.
among others be malfunctioning under the fol-
lowing circumstances:
▷ The battery of the remote control is dis-
Without remote control
charged. Replace the battery, refer to
page 35.
From the outside
▷ Interference of the radio connection from
Locking from the outside
transmission towers or other equipment
with high transmit power.
Do not lock the vehicle from the outside
with people inside the car, as the vehicle can-
▷ Shielding of the remote control due to
not be unlocked from inside without special
metal objects.
knowledge.◀
▷ Interference of the radio connection from
mobile phones or other electronic devices
Remove the key before pulling the door
in direct proximity.
handle
Do not transport the remote control together
Before pulling the outside door handle, remove
with metal objects or electronic devices.
the key to avoid damaging the paintwork and
In the case of interference, the vehicle can also
the key.◀
be unlocked and locked from the outside with-
out remote control, refer to page 39.
For US owners only
The transmitter and receiver units comply with
part 15 of the FCC/Federal Communication
Commission regulations. Operation is gov-
erned by the following:
FCC ID:
39
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
In the event of a severe accident, the vehicle is
automatically unlocked. The hazard warning
system and interior lights come on.
Unlocking and opening
Unlock or lock the driver's door via the door
lock using the integrated key, refer to page 34.
The other doors must be unlocked or locked
from the inside.
Alarm system
▷ Press the central locking system button to
The alarm system is not armed if the vehicle is
unlock the doors together, and then pull
locked with the integrated key.
the door handle above the armrest.
The alarm system is triggered when the door is
▷ On the door to be opened, pull the door
opened, if the vehicle was unlocked via the
handle twice: the first time unlocks the
door lock.
door, the second time opens it. The other
doors remain locked.
In order to terminate this alarm, unlock vehicle
with the remote control or switch on the igni-
tion, if needed, through emergency detection
Trunk lid
of the remote control, refer to page 35.
Opening
From the inside
During opening, the trunk lid pivots back and
Unlocking and locking
up.
Ensure that adequate clearance is available
before opening.
Opening from the outside
Pressing the central locking system button
locks or unlocks the vehicle with the doors
closed.
The vehicle is not secured against theft when
▷ Press button on the trunk lid.
locking.
The fuel filler flap remains unlocked.
40
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
▷
Press button on the remote con-
Locking separately
trol for approx. 1 second.
The trunk lid can be locked separately with the
As the case may be, the doors are also un-
switch in the glove compartment. If the glove
locked. Unlocking with the remote control,
compartment is locked, the trunk lid cannot be
refer to page 38.
opened.
The trunk lid is unlocked and can be swung
▷ Trunk lid secured, arrow 1.
upward.
▷ Trunk lid not secured, ar-
The trunk lid cannot be opened if the
row 2.
convertible top is not fully opened or closed.
Opening from the inside
Slide the switch into the arrow 1 position. This
secures the trunk lid and disconnects it from
With the vehicle is stationary, press
the central locking system.
the button in the driver's footwell.
This is beneficial when the vehicle is parked
The trunk lid is unlocked and opens slightly.
using valet service. The infrared remote con-
trol can be handed out without the key.
Closing
Emergency unlocking
Hints
Keep the closing path clear
Make sure that the closing path of the
trunk lid is clear; otherwise, injuries may re-
sult.◀
Do not place the remote control in the
cargo area
Take the remote control with you and do not
leave it in the cargo area; otherwise, the re-
Pull the handle inside the cargo area.
mote control is locked inside the vehicle when
The trunk lid unlocks.
the trunk lid is closed.◀
Closing
Comfort Access
The concept
The vehicle can be accessed without activat-
ing the remote control.
All you need to do is to have the remote con-
trol with you, such as in your pants pocket.
The vehicle automatically detects the remote
control when it is in close proximity or in the
Recessed grips in the interior trim of the trunk
car's interior.
lid make it easier to pull down the lid.
41
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
Comfort Access supports the following func-
Locking
tions:
▷ Unlocking/locking of the vehicle.
▷ Unlocking of the trunk lid separately.
▷ Start the engine.
Functional requirements
▷ There are no external sources of interfer-
ence nearby.
▷ To lock the vehicle, the remote control
Touch the surface on the door handle of the
must be located outside of the vehicle.
driver's or front passenger door, arrow, with
▷ The next unlocking and locking cycle is not
your finger for approx. 1 second without grasp-
possible until after approx. 2 seconds.
ing the door handle.
▷ The engine can only be started if the re-
This corresponds with pressing the button on
mote control is in the vehicle.
the remote control.
To save battery power, ensure that the ignition
Unlocking
and all electronic systems and/or power con-
sumers are turned off before locking the vehi-
cle.
Convenient closing
Monitor closing
Monitor closing to ensure that no one
becomes trapped.◀
Grasp the door handle on the driver's or front
passenger door completely, arrow.
This corresponds with pressing the button on
the remote control.
Touch the surface on the door handle of the
driver's or front passenger door, arrow, with
your finger and hold it there without grasping
the door handle.
This corresponds to pressing and holding
the remote control button.
In addition to locking, the exterior mirrors fold
in.
42
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
Separately unlocking the trunk lid
Doors
Press button on the exterior of the trunk lid.
1. "Settings"
This corresponds to pressing
the re-
2. "Doors/key"
mote control button.
3.
Select the symbol.
The situation of the doors does not change.
4. Select the desired function:
Do not place the remote control in the
▷ "Driver's door only"
cargo area
Only the driver's door and the fuel filler
Take the remote control with you and do not
flap are unlocked. Pressing again un-
leave it in the cargo area; otherwise, the re-
locks the entire vehicle.
mote control is locked inside the vehicle when
▷ "All doors"
the trunk lid is closed.◀
The entire vehicle is unlocked.
Malfunction
Trunk lid
Remote control detection by the vehicle can
Depending on optional features and country
among others be malfunctioning under the fol-
version, this setting is not offered in some
lowing circumstances:
cases.
▷ The battery of the remote control is dis-
1. "Settings"
charged. Replace the battery, refer to
page 35.
2. "Doors/key"
▷ Interference of the radio connection from
3.
Select the symbol.
transmission towers or other equipment
4. Select the desired function:
with high transmit power.
▷ "Tailgate"
▷ Shielding of the remote control due to
The trunk lid unlocks.
metal objects.
▷ "Tailgate + door(s)"
▷ Interference of the radio connection from
The trunk lid and the doors are un-
mobile phones or other electronic devices
locked.
in direct proximity.
Do not transport the remote control together
Confirmation signals from the vehicle
with metal objects or electronic devices.
The settings are saved in the active profile, re-
In the case of a malfunction, unlock and lock
fer to page 35.
the vehicle using the buttons of the remote
control or using the integrated key, refer to
1. "Settings"
page 39.
2. "Doors/key"
3. Deactivate or activate the desired confir-
mation signals.
Adjusting
▷ "Acoustic sig. lock/unlock"
Unlocking
▷ "Flash when lock/unlock"
The settings are saved in the active profile, re-
fer to page 35.
43
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
Automatic locking
Alarm system
The settings are saved in the active profile, re-
fer to page 35.
The concept
When the vehicle is locked, the vehicle alarm
1. "Settings"
system responds to:
2. "Doors/key"
▷ Opening a door, the hood or the trunk lid.
3. Select the desired function:
▷ Movements in the interior.
▷ "Lock if no door is opened"
▷ Changes in the vehicle tilt, e. g., during at-
The vehicle locks automatically after a
tempts at stealing a wheel or when towing
short period of time if no door is
the car.
opened.
▷ Disconnected battery voltage.
▷ "Lock after start driving"
The alarm system briefly signals tampering:
The vehicle locks automatically after
▷ By sounding an acoustic alarm.
you drive off.
▷ By switching on the hazard warning sys-
Retrieving the seat and mirror settings
tem.
The driver's seat and exterior mirror positions
▷ By flashing the daytime running lights.
used last are stored for the remote control cur-
rently in use.
Arming and disarming the alarm
system
When the vehicle is unlocked, these positions
are automatically retrieved if this function was
When you unlock or lock the vehicle, either
activated.
with the remote control or via the Comfort Ac-
cess, the alarm system is disarmed or armed at
Pinch hazard when moving back the seat
the same time.
If this function is used, first make sure
that the footwell behind the driver's seat is
Door lock and armed alarm system
empty. Otherwise, people might get injured or
The alarm system is triggered when the door is
objects damaged when the seat is moved
opened, when the vehicle is unlocked via the
back.◀
door lock.
The adjustment procedure is interrupted:
Trunk lid and armed alarm system
▷ When a seat position switch is pressed.
The trunk lid can be opened even when the
▷ When a button of the seat and mirror mem-
alarm system is armed.
ory is pressed.
After the trunk lid is closed, it is locked and
Activating the setting
monitored again when the doors are locked.
The hazard warning system flashes once.
1. "Settings"
2. "Doors/key"
Panic mode
3. "Last seat position autom."
You can trigger the alarm system if you find
yourself in a dangerous situation.
Press button on the remote control for
at least 3 seconds.
44
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
To switch off the alarm: press any button.
Interior motion sensor
The interior is monitored to the height of the
Indicator lamp on the interior rearview
seats. The alarm system is armed together
mirror
with the interior motion sensor even when the
convertible top is open. Falling objects such as
leaves can trigger the alarm unintentionally.
The windows must be closed for the system to
function properly.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sen-
sor can be switched off together, such as in
the following situations:
▷
The indicator lamp flashes briefly every
▷ In automatic car washes.
2 seconds:
▷ In duplex garages.
The system is armed.
▷ During transport on trains carrying vehi-
▷
The indicator lamp flashes after locking:
cles, at sea or on a trailer.
The doors, hood or trunk lid is not closed
▷ With animals in the vehicle.
properly, but the rest of the vehicle is se-
cured.
Switching off the tilt alarm sensor and
After 10 seconds, the indicator lamp
interior motion sensor
flashes continuously. Interior motion sen-
Press the remote control button again
sor and tilt alarm sensor are not active.
within 10 seconds as soon as the vehicle
When the still open access is closed, inte-
is locked.
rior motion sensor and tilt alarm sensor will
The indicator lamp lights up for approx. 2 sec-
be switched on.
onds and then continues to flash.
▷
The indicator lamp goes out after unlock-
The tilt alarm sensor and interior motion sen-
ing:
sor are turned off, until the vehicle is locked
The vehicle has not been tampered with.
again.
▷
The indicator lamp flashes after unlocking
until the engine ignition is switched on, but
Switching off the alarm
no longer than approx. 5 minutes:
▷ Unlock vehicle with the remote control or
An alarm has been triggered.
switch on the ignition, if needed through
emergency detection of remote control, re-
Tilt alarm sensor
fer to page 35.
The tilt of the vehicle is monitored.
▷ With Comfort Access: if you are carrying
the remote control on your person, grasp
The alarm system responds in situations such
the driver side or front passenger side door
as attempts to steal a wheel or when the car is
handle completely.
towed.
45
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
Power windows
Closing individually
Keep the closing path clear
Hint
Monitor closing and make sure that the
Take the remote control with you
closing path of the window is clear; otherwise,
injuries may result.◀
Take the remote control with you when
leaving the vehicle so that children, e.g., can-
not operate the power windows and injure
▷
Pull the switch to the resistance
themselves.◀
point.
The window closes while the switch is
held.
▷
Pull the switch beyond the resistance
point.
The front windows close automatically.
Pulling again stops the motion. The rear
windows close, as long as the switch is
pressed.
See also: Convenient closing, refer to page 38,
Opening individually
via remote control.
▷
Press the button to the resistance
Closing together
point.
Pull the switch to or beyond the resist-
The window opens while the switch is held.
ance point.
All windows are closed while the switch is be-
▷
Press the switch beyond the resist-
ing held.
ance point.
The window opens automatically. Pressing
Pinch protection system
the switch again stopse the motion.
See also: Convenient opening, refer to
Danger of jamming even with pinch pro-
page 37, via remote control.
tection
Even with the pinch protection system, check
Opening together
that the window's closing path is clear; other-
wise, the closing action may not stop in certain
▷
Press the button to the resistance
situations, e.g., if thin objects are present.◀
point.
No window accessories
All windows open while the switch is being
Do not install any accessories in the win-
held.
dow's range of movement; otherwise, the
pinch protection system will be impaired.◀
▷
Press the switch beyond the resist-
ance point.
If closing force exceeds a specific margin as a
All windows open automatically.
window closes, closing is interrupted.
Pressing again stops the motion.
The window reopens slightly.
46
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
Closing without the pinch protection
air via the automatic climate control so that
system
no vacuum is produced in the vehicle.
Keep the closing path clear
▷ It is not possible to start the engine and
operate the convertible top simultane-
Monitor closing and make sure that the
ously. When the engine is started using the
closing path of the window is clear; otherwise,
Start/Stop button or using the Auto Start/
injuries may result.◀
Stop function, the convertible top move-
E.g. danger from the outside or ice might pre-
ment is briefly interrupted.
vent window from closing properly - proceed
as follows:
Overview
1. Pull the reel past the resistance point and
hold it there.
The pinch protection is limited and the
window reopens slightly if the closing force
exceeds a certain margin.
2. Pull the reel past the resistance point again
within approx. 4 seconds and hold it there.
The window closes without jam protection.
Convertible top switch
Convertible top
Functional requirements
General information
The ignition or radio-ready state must be
The convertible top can be opened or closed
switched on.
at speeds up to approx. 30 mph/50 km/h.
The following requirements must be fulfilled in
If the vehicle is accelerated above a speed of
order to be able to move the convertible top.
approx. 30 mph/50 km/h while the convertible
▷ The trunk partition is flipped down.
top is being moved, the convertible top move-
ment stops.
▷ The trunk lid is closed.
▷ The external temperature is above
Hints
14 ℉/-10 ℃.
▷ The trunk lid cannot be opened if the
▷ The voltage of the vehicle electrical system
convertible top is not fully opened or
is sufficient.
closed.
▷ The convertible top drive is not overheat-
▷ If possible, close the convertible top when
ing.
the vehicle is parked. A closed convertible
▷ The vehicle speed is not too high.
top protects it from weather-related dam-
age and to some extent from theft.
▷ The windows can be lowered.
▷ Event when the convertible top is closed,
If this requirement is not met, a check control
only store valuables in the locked trunk.
message is displayed.
▷ At higher speeds, vacuum produced in the
vehicle interior causes the convertible top
to begin to flutter. Increase the amount of
47
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
Safety information
Keep children away from the opening path of
the convertible top, otherwise, there is a risk of
Do not open convertible top at low tem-
injury.◀
peratures
With temperatures below +14 ℉/-10 ℃ do not
Observe traffic during operation
open the convertible top; otherwise damages
When the convertible top is opened while
could result.◀
driving, be alert to traffic; otherwise, it may re-
sult in an accident. If possible, do not move the
Allow wet convertible top to dry
convertible top while driving in reverse be-
Do not leave the open convertible top in
cause rearward vision is severely impaired
the convertible top well longer than one day
while the convertible top is in motion. During
while the top is still wet; otherwise, damage
windy conditions, do not operate the
could result due to moisture.◀
convertible top while driving.
Note the swivel range of the convertible
Do not drive faster than 30 mph/50 km/h; oth-
top
erwise, vehicle damage may occur.◀
The convertible top pivots up during opening
Do not attach any roof carrier systems to
and closing. When the top is moved, e.g., in
the convertible top
garages, make sure that there is a minimum
Do not attach any roof carrier systems; other-
height of 79 inches/2 meters; otherwise, it
wise, an accident may occur.◀
damages may result.◀
Do not operate convertible top on un-
Do not place objects on the convertible
even sections or road
top
Do not open or close convertible top on un-
Do not place any objects on the convertible
even sections of road. Otherwise, the vibra-
top, otherwise, they could fall and cause dam-
tions can result in damage to the convertible
age or injuries.◀
top.◀
No convertible top movement when roll-
over protection is activated
Before opening and closing
Do not move the convertible top when rollover
▷ Follow the safety instructions for the
protection is activated; otherwise, it may result
convertible top.
in damage to the convertible top.◀
▷ Make sure that the trunk partition in the
trunk is folded down.
Open and close convertible top com-
pletely
▷ Make sure that the cargo does not push
against the trunk partition from below.
Always open or close the convertible top com-
pletely. Convertible top and convertible top
▷ Make sure that the trunk lid is closed.
well storage cover are locked in the final posi-
tions. Driving with the convertible top or
Opening and closing from the inside
convertible top well storage cover unlocked
In order to protect the battery, move the
can result in damage.◀
convertible top only when the engine is run-
ning if possible.
Do not reach into the convertible top
Before closing the convertible top, remove any
mechanism
foreign objects from the windshield frame; oth-
Do not reach into the convertible top mecha-
erwise, closing may be prevented.
nism during the opening and closing operation.
48
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
▷
Press and hold the switch. The
▷ Convenient opening, refer to page 37, via
windows are rolled down, and the
the remote control.
convertible top opens as longs as the
▷ Convenient closing, refer to page 38, via
switch is pressed.
the remote control.
▷
Pull the switch and hold it. The
windows are lowered, the
Cargo area partition
convertible top closes and the windows are
raised again as long as the switch is pulled.
Push or pull switch until the convertible top is
completely open or closed and the end of the
procedure is indicated by a corresponding
Check Control message. Always make sure
that the convertible top well storage cover is
completely closed. If the convertible top is
completely open or closed, convertible top and
convertible top well storage cover are latched.
Fold down cargo area partition in the back so
that the convertible top can be opened.
Interruption
Fold down cargo area partition in the front in
Always open/close the convertible top
order to enlarge the cargo area capacity when
completely
the convertible top is closed.
A convertible top that is not opened or closed
completely is not locked and represents a haz-
Manually close convertible top
ard.◀
Hints
The convertible top movement is interrupted if
the switch is released. The sequence can be
If there is a defect, the convertible top can be
continued in the desired direction using the
manually closed. Two persons are necessary
switch.
to do this.
If there is a longer interruption with the ignition
Do not manually open convertible top
switched on, convertible top and convertible
and close it manually only in emergency
top well storage cover remain approx. 10 mi-
situations.
nutes in the current position before they slowly
Do not manually open the convertible top. The
go down. If the ignition is switched off,
convertible top well storage cover cannot latch
convertible top and convertible top well stor-
if there is an electrical malfunction and would
age cover lower already after a short waiting
open while driving.
period.
Manually close the convertible top only in
The convertible top and the convertible top
emergency situations.
well storage cover are not locked. Operate
Damage can result from improper handling.◀
switch again until the convertible operation is
terminated.
Before closing
Convenient operation from outside
1. Lower the windows completely.
When equipped with Comfort Access the
2. Switch off the ignition.
convertible top can also be operated from out-
side.
49
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
3. Carefully open the trunk lid, refer to
ing both hands, and swing it slightly up-
page 40, taking care not to damage the
ward.
convertible top well storage cover.
4. Remove the two large lids from the trim. If
needed, use the screwdriver from the on-
board vehicle tool kit.
2.
Before further opening the convertible top
well storage cover, secure the hook, arrow.
Insert the screwdriver from the outside into
the hook and hold it in place during further
opening.
5. Unlock convertible top well storage cover.
Pull on the right lid, until the convertible
top well storage cover opens on the right
side.
Proceed accordingly on the left side.
6. When the convertible top is closed man-
ually, the trunk lid can no longer be
opened.
Remove urgently needed items from the
trunk and close the trunk lid.
3.
Open the convertible top well storage
You need the screwdriver and Allen
cover completely. Make sure that the
wrench from the onboard vehicle tool kit.
hinge, arrow, remains slightly forward bent.
Lifting out convertible top
Only close the convertible top with two
people
Carry out the following steps with the aid of a
second person and with the doors open; other-
wise, it may result in damage to the convertible
top.◀
1. Grasp the sheet metal of the convertible
top well storage cover from the outside us-
4.
Lift the convertible top out on the front on
both sides, and swing it forward. Keep the
50
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
convertible top well storage cover open,
top frame must be locked in the windshield
e.g., with your shoulder.
frame.
The rear convertible top frame is automati-
cally pressed onto the convertible top well
storage cover.
5. Place the rear convertible top frame verti-
cally, close the convertible top well storage
cover, and press it down as far as possible
on both sides. Next, place the rear
3. Have the convertible top checked by the
convertible top frame onto the convertible
service center.
top well storage cover.
Wind deflector
The concept
The wind deflector reduces the air movement
in the vehicle interior when driving with the
convertible top down.
Installation
The wind deflector is located in a protective
Lock convertible cover
jacket in the trunk.
1. Carefully remove the cover in the center of
1. Take the wind deflector out of the protec-
the front convertible top frame. If needed,
tive jacket.
use the screwdriver.
Fully extend the wind deflector.
2. While one person presses the center of
front convertible frame onto the windshield
2. Insert wind deflector from one side of the
frame: turn the Allen wrench counterclock-
vehicle with the pins in the corresponding
wise up to the stop. The front convertible
51
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Opening and closing
fixing points on the opposite side of the ve-
Do not tilt the front seat backrest too far
hicle.
back
Do not tilt the front seat backrest too far back
with the wind deflector installed if the seat is to
be moved all the way back. Otherwise, the
wind deflector will be damaged.◀
Removing
Proceed in reverse sequence.
Luggage on the back seat
3.
Press the wind deflector inwardly and up,
In order to store luggage on the rear seat when
arrow 1, to the extent that the wind deflec-
the wind deflector is installed, the outer frame
tor can be positioned in front of the fixing
of the wind deflector is flipped up.
points on the installation side.
In this wind deflector position, the rear seat
Press the wind deflector downward, while
backrest can be folded down, e.g. to protect
inserting the pins in the corresponding fix-
the upholstery against damage caused by
ing points, arrows 2.
pieces of luggage.
1. Turn the release lever 90°, arrow 1, and
fold the outer frame forward, arrow 2.
4. To ensure safe latching, press the wind de-
flector downward in the middle, arrows 1.
Grasp the inner framework of the wind de-
2. Place luggage on the rear seat. Make sure
flector on the recessed grip and fold it up,
that the luggage does not project past the
arrow 2.
fixing points for the wind deflector.
52
Online Edition for Part no. 01 40 2 959 847 - II/15
Opening and closing Controls
3. Fold wind deflector back and align it with
the fixing point on the opposite side of the
vehicle.
Turn release lever back by 45° in order to
extend the opposing pin.
4. Align wind deflector with the fixing point on
the installation side and turn back the re-
lease lever another 45° in order to extend
the second pin.
53
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Adjusting
Adjusting
Keep the movement area unobstructed
Vehicle features and options
When changing the seat position, keep
This chapter describes all standard, country-
the seat's area of movement unobstructed;
specific and optional features offered with the
otherwise, people might get injured or objects
series. It also describes features that are not
damaged.◀
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
Manually adjustable seats
systems. The respectively applicable country
provisions must be observed when using the
At a glance
respective features and systems.
Sitting safely
The ideal seating position can make a vital
contribution to relaxed, fatigue-free driving.
The seating position plays an important role in
an accident in combination with:
▷ Safety belts, refer to page 58.
1
Forward/backward
▷ Head restraints, refer to page 59.
2
Thigh support
▷ Airbags, refer to page 99.
3
Seat tilt
4
Backrest width
Seats
5
Lumbar support
6
Height
Hints
7
Backrest tilt
Do not adjust the seat while driving
Do not adjust the driver's seat while driv-
ing, or the seat could respond with unexpected
Forward/backward
movement and the ensuing loss of vehicle
control could lead to an accident.◀
Do not incline the backrest too far to the
rear
Do not incline the backrest too far to the rear
while driving, or there is a risk of slipping under
the safety belt in the event of an accident. This
would eliminate the protection normally pro-
vided by the belt.◀
Pull the lever and slide the seat in the desired
direction.
54
Online Edition for Part no. 01 40 2 959 847 - II/15
Adjusting Controls
After releasing the lever, move the seat for-
to the seat or lift it off to make sure the seat
ward or back slightly making sure it engages
engages properly.
properly.
Electrically adjustable seats
Height
At a glance
Pull the lever and apply your weight to the seat
or lift it off, as necessary.
1
Seat and mirror memory
2
Backrest width
Backrest tilt
3
Lumbar support
4
Backrest tilt
5
Forward/backward, height, seat tilt
General information
The seat setting for the driver's seat is stored
for the profile currently in use. When the vehi-
cle is unlocked via the remote control, the po-
sition is automatically retrieved if the Function,
refer to page 44, is activated for this purpose.
Pull the lever and apply your weight to the
backrest or lift it off, as necessary.
Adjustments in detail
1. Forward/back.
Seat tilt
Pull the lever and move the seat to the desired
tilt. After releasing the lever, apply your weight
55
Online Edition for Part no. 01 40 2 959 847 - II/15
Controls Adjusting
2. Height.
Thigh support
Pull the lever at the front of the seat and adjust
3.
Seat tilt.
the thigh support.
Lumbar support
The curvature of the seat backrest can be ad-
justed in a way that it supports the lumbar re-
gion of the spine. The lower back and the
spine are supported for upright posture.
▷ Press the front/rear section
of the switch.
4.
Backrest tilt.
The curvature is increased/
decreased.
▷ Press the upper/lower sec-
tion of the switch.
The curvature is shifted up/
down.
Backrest width
Change the width of the back-
rest using the side wings to ad-
just the lateral support.
56
Online Edition for Part no. 01 40 2 959 847 - II/15
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст