Hummer H3. Manual — part 245
Fig. 596: View Of Balance Shaft Chain Tensioner
Courtesy of GENERAL MOTORS CORP.
9. Install NEW right balance shaft assembly retaining bolts.
Tighten: Tighten the NEW right balance shaft assembly retaining bolts to 12 N.m (106 lb
in).
10. Install the balance shaft chain tensioner and bolts.
Tighten: Tighten the balance shaft chain tensioner bolts to 10 N.m (89 lb in).
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
11. Remove the small tool from the link plate hole in order to regain chain tension.
CYLINDER HEAD INSTALLATION
Tools Required
J 45059 Angle Meter. See Special Tools.
Fig. 597: View Of Cylinder Head Gasket
IMPORTANT: Do not force the tensioner to the next notch by pushing up on
the tensioner shoe. This will over-tension the chain and may
result in a whine noise.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Courtesy of GENERAL MOTORS CORP.
1. Install the dowel pins - cylinder head locator, if necessary.
2. Install a new cylinder head gasket.
Fig. 598: View Of Cylinder Head
Courtesy of GENERAL MOTORS CORP.
3. Install the cylinder head.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Fig. 599: View Of Cylinder Head Bolts
Courtesy of GENERAL MOTORS CORP.
4. Install new cylinder head bolts.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст