Hummer H3. Manual — part 1267
specification.
DISCHARGE HOSE REPLACEMENT
Fig. 16: Discharge Hose Replacement
Courtesy of GENERAL MOTORS CORP.
Discharge Hose Replacement
Callout
Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedure
1. Evacuate the A/C system. Refer to Refrigerant Recovery and Recharging.
2. Remove the grille assembly. Refer to Grille Replacement .
3. Remove the left front wheelhouse panel. Refer to Wheelhouse Panel Replacement
(Front) or Wheelhouse Panel Replacement (Rear) .
NOTE:
Refer to Fastener Notice .
A/C Compressor and Condenser - Hose Assembly Bolt
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
SUCTION HOSE REPLACEMENT (LEFT HAND DRIVE)
1
Tighten: 16 N.m (12 lb ft)
2
Sealing Washer
Tip:
Remove and discard the sealing washer.
Cap the systems openings. Refer to Sealing Washer Replacement.
3
A/C Compressor and Condenser - Hose Assembly Nut
Tighten: 16 N.m (12 lb ft)
4
Sealing Washer
Tip:
Remove and discard the sealing washer. Refer to Sealing Washer
Replacement.
Cap the A/C systems openings. Refer to Sealing Washer
Replacement.
5
A/C Compressor and Condenser Hose Assembly
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
Fig. 17: Suction Hose Replacement (Left Hand Drive)
Courtesy of GENERAL MOTORS CORP.
Suction Hose Replacement (Left Hand Drive)
Callout
Component Name
Preliminary Procedure
1. Recover the A/C system. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
3. Remove the left front wheelhouse panel. Refer to Wheelhouse Panel Replacement
(Front) or Wheelhouse Panel Replacement (Rear) .
1
A/C Compressor Tube Assembly Nut
NOTE:
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
SUCTION HOSE REPLACEMENT (RIGHT HAND DRIVE)
Tighten: 16 N.m (12 lb ft)
Refer to Fastener Notice .
2
Sealing Washer
Tip: Remove and discard the sealing washer. Refer to Sealing Washer
Replacement.
3
A/C Compressor Tube Assembly Bolt
Tighten: 16 N.m (12 lb ft)
4
A/C Compressor Tube Assembly Bolt
Tighten: 16 N.m (12 lb ft)
5
A/C Compressor Tube Assembly Bolt
Tighten: 16 N.m (12 lb ft)
6
Sealing Washer
Tip:
Remove and discard the sealing washer. Refer to Sealing Washer
Replacement.
Cap the A/C systems openings.
7
A/C Compressor Tube Assembly
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст