Hummer H3. Manual — part 1047
REAR BRAKE CALIPER BRACKET REPLACEMENT
Fig. 23: Brake Caliper Bracket Replacement - Rear
Courtesy of GENERAL MOTORS CORP.
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1
Rear Brake Caliper Guide Pin Bolt (Qty: 2)
Tip: DO NOT reuse the brake caliper bracket bolts. Replace with NEW
bolts.
Tighten: 36 N.m (27 lb ft)
2
Rear Disc Brake Caliper
Tip: Do NOT disconnect the hydraulic brake flexible hose from the caliper.
3
Rear Disc Brake Pad (Qty: 2)
4
Rear Disc Brake Caliper Bracket Retainer (Qty: 2)
5
Rear Disc Brake Caliper Guide Pin (Qty: 2)
6
Rear Brake Caliper Guide Pin Seal
7
Rear Brake Caliper Guide Pin Boot (Qty: 2)
2007 Hummer H3
2007 BRAKES Disc Brakes - H3
Rear Brake Caliper Bracket Replacement
FRONT BRAKE ROTOR REPLACEMENT
Callout
Component Name
Preliminary Procedures
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the rear disc brake pads. Refer to Rear Disc Brake Pads Replacement.
CAUTION:
Refer to Brake Dust Caution .
IMPORTANT:
If removing the brake caliper bracket to access other vehicle components, remove the disc
brake caliper, disc brake pads and the caliper bracket as an assembly.
1
Brake Caliper Bracket Bolt (Qty: 2)
Tip:
Do NOT reuse the brake caliper bracket mounting bolts. Replace the
bolts.
Replace the brake caliper bracket bolts each time the bolts are
removed.
Tighten: 135 N.m (100 lb ft)
NOTE:
Refer to Fastener Notice .
2
Rear Brake Caliper Bracket
3
Rear Disc Brake Caliper Guide Pin (Qty: 2)
Tip: The disc brake caliper guide pins are not interchangeable. Note the
location of the guide pins.
4
Rear Brake Caliper Guide Pin Seal
Tip: The guide pin seal is installed on the lower disc brake caliper guide
pin.
5
Rear Brake Caliper Guide Pin Boot (Qty: 2)
2007 Hummer H3
2007 BRAKES Disc Brakes - H3
Fig. 24: Brake Rotor Replacement - Front
Courtesy of GENERAL MOTORS CORP.
Front Brake Rotor Replacement
Callout
Component Name
CAUTION:
Refer to Brake Dust Caution .
CAUTION:
Refer to Brake Fluid Irritant Caution .
NOTE:
Refer to Fastener Notice .
NOTE:
Refer to Brake Caliper Notice .
2007 Hummer H3
2007 BRAKES Disc Brakes - H3
REAR BRAKE ROTOR REPLACEMENT
Fig. 25: Brake Rotor Replacement - Rear
Courtesy of GENERAL MOTORS CORP.
Rear Brake Rotor Replacement
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedures
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1
Front Disc Brake Rotor Retainer (Qty: 2)
2
Brake Caliper Bolt (Qty: 2)
Tighten: 195 N.m (144 lb ft)
3
Front Brake Caliper
Tip: Do NOT disconnect the hydraulic brake flexible hose from the caliper.
4
Front Brake Rotor
Tip: Road test the vehicle in order to burnish the brake pads. Refer to Brake
Pad and Rotor Burnishing.
Callout
Component Name
CAUTION:
Refer to Brake Dust Caution .
2007 Hummer H3
2007 BRAKES Disc Brakes - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст