Hummer H3. Manual — part 1575
Fig. 12: Seat Motors - Passenger (AG2) Connector End Views
Courtesy of GENERAL MOTORS CORP.
Passenger Power Seat Motor Connector Parts Information
Passenger (AG2) Seat Motors Connector Terminal Identification
Connector Part Information
OEM: 12064754
Service: 15305872
Description: 6-Way M Metri-Pack 280 Series (BK)
Terminal Part Information
Terminal/Tray: 12034047/2
Core/Insulation Crimp: C/D
Release Tool/Test Probe: 12094430/J-35616-5 (PU)
Pin
Wire Color
Circuit No.
Function
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Power Seats - H3
DIAGNOSTIC INFORMATION AND PROCEDURES
DIAGNOSTIC STARTING POINT - SEATS
Begin the system diagnosis by reviewing the system Description and Operation. Reviewing the
Description and Operation information will help you determine the correct symptom diagnostic
procedure when a malfunction exists. Reviewing the Description and Operation information will
also help you determine if the condition described by the customer is normal operation. Refer to
Symptoms - Power Seats in order to identify the correct procedure for diagnosing the system
and where the procedure is located.
SYMPTOMS - POWER SEATS
Visual/Physical Inspection
Inspect for aftermarket devices which could affect the operation of the power seat system.
Refer to Checking Aftermarket Accessories .
Inspect the easily accessible or visible system components for obvious damage or conditions
which could cause the symptom.
A
TN
285
Passenger Seat Horizontal Motor
Forward Control
B
L-GN
284
Passenger Seat Horizontal Motor
Rearward Control
C
D-GN
286
Passenger Seat Front Vertical Motor
Up Control
D
D-BU
287
Passenger Seat Front Vertical Motor
Down Control
E
YE
282
Passenger Seat Rear Vertical Motor
Up Control
F
L-BU
283
Passenger Seat Rear Vertical Motor
Down Control
IMPORTANT: Review the system description in order to familiarize yourself
with the system functions. Refer to one of the following
descriptions:
Lumbar Switch Replacement
Power Seats System Description and Operation
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Power Seats - H3
Inspect the power seat for proper mechanical operation.
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to
Testing for Intermittent Conditions and Poor Connections .
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the
symptom:
Lumbar Support Inoperative
Power Seat Inoperative
LUMBAR SUPPORT INOPERATIVE
Lumbar Support Inoperative
Step
Action
Yes
No
Schematic Reference: Driver Seat Schematics and Passenger Seat Schematics
Connector End View Reference: Power Seat Connector End Views
DEFINITION: The power lumber function is inoperative, all other power seat functions
operate normal.
1
Did you review the Power Seat System
Description and Operation and perform the
necessary inspections?
Go to Step 2 Go to
2
Attempt to operate all of the power seat
adjuster motors through their full range of
adjustment.
Do all of the power seat adjuster motors
operate properly?
Go to Testing
for Intermittent
Conditions and
Poor
Connections
Go to Step 3
3
Are all of the power seat adjuster motors
inoperative?
Go to Power
Seat
Inoperative
Go to Step 4
4
1. Disconnect the lumbar adjuster motor
connector.
2. Connect a test lamp across the motor
control circuit terminals.
3. Press the power lumbar switch in both
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Power Seats - H3
POWER SEAT INOPERATIVE
Power Seat Inoperative
directions.
Does the test lamp illuminate when the
switch is pressed in both directions?
Go to Step 6
Go to Step 5
5
1. Disconnect the power lumbar switch
connector.
2. Test the lumbar adjuster motor control
circuits for an open or short to
ground. Refer to Circuit Testing and
Wiring Repairs .
Did you find and correct the condition?
Go to Step 10
Go to Step 8
6
Inspect for poor connections at the lumbar
adjuster motor. Refer to Testing for
Intermittent Conditions and Poor
Connections and Connector Repairs .
Did you find and correct the condition?
Go to Step 10
Go to Step 7
7
Replace the lumbar adjuster motor. Refer
to Front Seat Lumbar Support
Replacement.
Is the repair complete?
Go to Step 10
-
8
Inspect for poor connections at the power
lumbar switch. Refer to Testing for
Intermittent Conditions and Poor
Connections and Connector Repairs .
Did you find and correct the condition?
Go to Step 10
Go to Step 9
9
Replace the power lumbar switch. Refer to
Power Seat Switch Replacement.
Is the repair complete?
Go to Step 10
-
10
Operate the system in order to verify the
repair.
Did you correct the condition?
System OK
Go to Step 2
Step
Action
Yes
No
Schematic Reference: Driver Seat Schematics and Passenger Seat Schematics
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Power Seats - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст