Hummer H3. Manual — part 1479
Fig. 56: Identifying Shift Control Shaft
Courtesy of GENERAL MOTORS CORP.
16. Remove the shift control shaft from the shift shaft gates.
2007 Hummer H3
2007 TRANSMISSION Manual Transmission - Aisin AR5 - H3
Fig. 57: Locating Input Shaft Bearing Retainer Bolts
Courtesy of GENERAL MOTORS CORP.
17. Remove the front bearing retainer bolts. Discard the bolts. New bolts are required for
assembly.
18. Remove the front bearing retainer.
2007 Hummer H3
2007 TRANSMISSION Manual Transmission - Aisin AR5 - H3
Fig. 58: Removing/Installing Input Shaft Seal
Courtesy of GENERAL MOTORS CORP.
19. Using a suitable punch and a hammer, remove the input shaft seal from the bearing retainer.
Do not use the seal again.
2007 Hummer H3
2007 TRANSMISSION Manual Transmission - Aisin AR5 - H3
Fig. 59: Locating Outer Retaining Rings On Input Shaft Bearing & Countershaft
Front Bearing
Courtesy of GENERAL MOTORS CORP.
20. Remove the outer retaining ring from the input shaft bearing.
2007 Hummer H3
2007 TRANSMISSION Manual Transmission - Aisin AR5 - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст