Hummer H3. Manual — part 1715

Fig. 35: View Of Endgate Window
Courtesy of GENERAL MOTORS CORP.

4. This will allow the urethane adhesive to be separated from the endgate window (1).

Leave a base of urethane on the pinchweld flange.

The only suitable lubrication is clear water.

Use J 24402-A , J 39032 or equivalent in order to remove the endgate window (1).
See Special Tools.

5. If the locator pins were damaged during removal, they must be replaced.

6. With the aid of an assistant, use the suction cups to remove the endgate window from the

CAUTION: Refer to Glass and Sheet Metal Handling Caution .

IMPORTANT: Keep the cutting edge of the tool against the endgate window

(1).

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3

opening.

Installation Procedure

1. Install the endgate window into the opening. Refer to Adhesive Installation of Stationary

Windows.

Fig. 36: View Of Endgate Window
Courtesy of GENERAL MOTORS CORP.

2. Insure the pinchweld is primed properly.

3. Remove the double layer of masking tape around the perimeter of the painted surfaces and

the interior trim.

FRONT SIDE DOOR WINDOW CHANNEL REPLACEMENT

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3

Fig. 37: Window Weatherstrip Run Channel Assembly Replacement - Front
Courtesy of GENERAL MOTORS CORP.

Front Side Door Window Channel Replacement

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Remove the interior trim panel. Refer to Front Side Door Trim Panel

NOTE:

Refer to Fastener Notice .

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3

STATIONARY WINDOW REVEAL MOLDING REPAIR

Removal Procedure

Replacement .

2. Remove the water deflector. Refer to Front Side Door Water Deflector

Replacement .

3. Remove the front side door window. Refer to Front Side Door Window

Replacement.

1

Bolt, Front Side Door Window Weatherstrip Run Channel

Tighten: 10 N.m (89 lb in)

2

Weatherstrip Run Channel, Front Door Window
Tip: Pull the weatherstrip run channel down from the window frame then
up to remove it from the door.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3