Hummer H3. Manual — part 761
The 1-2 shift solenoid (5)
The transmission fluid pressure (TFP) manual valve position switch (6)
The 3-2 shift solenoid (7)
The torque converter clutch pulse width modulation (TCC/PWM) solenoid (8)
2. Remove the fluid level indicator.
3. Remove the oil pan and filter. Refer to Automatic Transmission Fluid and Filter
Replacement.
Fig. 109: Identifying Electrical Components In Valve Body
Courtesy of GENERAL MOTORS CORP.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
4. Disconnect the internal wiring harness electrical connectors from the following components:
The TFP manual valve position switch (1)
The 1-2 shift solenoid (2)
The 2-3 shift solenoid (3)
The pressure control solenoid (4)
The TCC/PWM solenoid (5)
The 3-2 shift solenoid (6)
Fig. 110: Fluid Indicator Stop Bracket & Bolt
Courtesy of GENERAL MOTORS CORP.
5. RWD ONLY:
1. Remove the fluid indicator stop bracket bolt (2).
2. Remove the fluid indicator bracket (1).
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 111: View Of TCC PWM Solenoid & Retainer
Courtesy of GENERAL MOTORS CORP.
6. Remove the TCC/PWM solenoid retainer (2) with a small screwdriver. Rotate the solenoid
(1) in the bore, if necessary, until the flat part of the retainer (2) is visible.
7. Remove the TCC/PWM solenoid (1) in order to access the TCC solenoid retaining bolts.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 112: View Of TCC Solenoid Retaining Bolts
Courtesy of GENERAL MOTORS CORP.
8. Remove the TCC solenoid retaining bolts.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст