Hummer H3. Manual — part 22
Fig. 39: Battery Vent Duct
Courtesy of GENERAL MOTORS CORP.
9. Clean any existing corrosion from the battery terminal and battery cable using a wire brush.
2006 Hummer H3
2006 ENGINE Engine Electrical - H3
Fig. 40: Battery Cables
Courtesy of GENERAL MOTORS CORP.
10. Connect the positive battery cable (2) to the battery.
Tighten: Tighten the nut to 9 N.m (80 lb in).
11. Close the protective cover over the positive battery cable terminal.
12. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect
Procedure.
BATTERY BOX REPLACEMENT
2006 Hummer H3
2006 ENGINE Engine Electrical - H3
Removal Procedure
1. Remove the battery. Refer to Battery Replacement.
2. Remove the battery cable harness clips (1, 2) from the battery tray.
Fig. 41: Harness Clips
Courtesy of GENERAL MOTORS CORP.
2006 Hummer H3
2006 ENGINE Engine Electrical - H3
Fig. 42: Lower Battery Box
Courtesy of GENERAL MOTORS CORP.
3. Lift the lower battery box upward from the battery tray.
Installation Procedure
2006 Hummer H3
2006 ENGINE Engine Electrical - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст