Hummer H3. Manual — part 541
Fig. 184: View Of Engine Oil Filter
Courtesy of GENERAL MOTORS CORP.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Place a suitable drain pan under the oil filter.
3. Remove the oil filter (437).
2008 Hummer H3
2008 ENGINE Engine Mechanical - 5.3L - H3
Fig. 185: Oil Filter Adapter
Courtesy of GENERAL MOTORS CORP.
4. Remove the oil filter adapter (438).
Installation Procedure
2008 Hummer H3
2008 ENGINE Engine Mechanical - 5.3L - H3
Fig. 186: Oil Filter Adapter
Courtesy of GENERAL MOTORS CORP.
1. Install the oil filter adapter (438).
Tighten: Tighten the adapter to 55 N.m (40 lb ft).
NOTE:
Refer to Fastener Notice .
2008 Hummer H3
2008 ENGINE Engine Mechanical - 5.3L - H3
Fig. 187: View Of Engine Oil Filter
Courtesy of GENERAL MOTORS CORP.
2. Lubricate the oil filter seal with clean engine oil.
3. Install the oil filter (437).
Tighten: Tighten the filter to 30 N.m (22 lb ft).
4. Lower the vehicle.
5. Refill the engine oil. Refer to Approximate Fluid Capacities and/or Fluid and
Lubricant Recommendations .
2008 Hummer H3
2008 ENGINE Engine Mechanical - 5.3L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст