Hummer H3. Manual — part 728
Fig. 13: Connecting J 45096 Adapters To Oil Cooler Supply And Return Lines
Courtesy of GENERAL MOTORS CORP.
1. Connect the J 45096 adapters (1) to the vehicle transmission oil cooler supply and return
lines at the transmission, may require J 35944-200 . See Special Tools.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 14: Identifying Black Supply Hose And Clear Waste Hose
Courtesy of GENERAL MOTORS CORP.
2. Connect the black supply hose (1) to the return line, top connector of the transmission and
the clear waste hose (2) to the feed line, bottom connector of the transmission, to the vehicle
cooler lines. This is the reverse flow backflush direction.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 15: Setting Main Function Switch To FLUSH Position
Courtesy of GENERAL MOTORS CORP.
3. Turn the main function switch to the FLUSH position. Allow the machine to operate for 30
seconds.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 16: Setting Main Function Switch To IDLE Position
Courtesy of GENERAL MOTORS CORP.
4. Turn the main function switch to the IDLE position and allow the supply vessel pressure to
dissipate.
Forward Flush
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст