Hummer H3. Manual — part 1115
Fig. 52: Identifying Radiator Support Bracket Retaining Bolt
Courtesy of GENERAL MOTORS CORP.
6. Install the radiator support bracket.
7. Install the radiator support bracket retaining bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
NOTE:
Refer to Fastener Notice .
2007 Hummer H3
2007 ENGINE Engine Cooling - H3
Fig. 53: Identifying Condenser-To-Radiator Retaining Bolts
Courtesy of GENERAL MOTORS CORP.
8. Install the condenser to radiator retaining bolts.
Tighten: Tighten the bolts to 28 N.m (21 lb ft).
2007 Hummer H3
2007 ENGINE Engine Cooling - H3
9. Install the discharge hose. Refer to DISCHARGE HOSE REPLACEMENT .
10. Install the evaporator tube. Refer to EVAPORATOR TUBE REPLACEMENT (LEFT
HAND DRIVE) or EVAPORATOR TUBE REPLACEMENT (RIGHT HAND
DRIVE) .
Fig. 54: View If Fan Shroud & Radiator
Courtesy of GENERAL MOTORS CORP.
11. Install the fan shroud to the radiator.
12. Raise the vehicle.
2007 Hummer H3
2007 ENGINE Engine Cooling - H3
Fig. 55: Identifying Radiator Outlet Hose
Courtesy of GENERAL MOTORS CORP.
13. Install the radiator outlet hose to the radiator.
14. Using J 38185 reposition the radiator outlet hose clamp to the radiator. See Special Tools.
2007 Hummer H3
2007 ENGINE Engine Cooling - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст