Hummer H3. Manual — part 387
Fig. 393: View Of Right Bearing
Courtesy of GENERAL MOTORS CORP.
6. Remove and discard the right rear bearing (1).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 394: Installing 44225 Into Right Balance Shaft Bearing Bore
Courtesy of GENERAL MOTORS CORP.
7. Install J 44225 into the right balance shaft bearing bore.
8. Position the swivel end inside lip of J 44225 against the frontside of the front bearing.
9. Turn the nut clockwise to remove the bearing.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 395: View Of Right Bearing
Courtesy of GENERAL MOTORS CORP.
10. Remove and discard the right front bearing (1).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 396: Installing J 4425 Into Left Balance Shaft Bearing Bore
Courtesy of GENERAL MOTORS CORP.
11. Install J 44225 into the left balance shaft bearing bore.
12. Position the swivel end inside lip of J 44225 against the frontside of the rear bearing.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст