Hummer H3. Manual — part 895
Fig. 3: View Of Wheel Drive Shaft Nut & Washer
Courtesy of GENERAL MOTORS CORP.
2. Remove the wheel drive shaft nut and washer.
IMPORTANT: DO NOT reuse the wheel drive shaft nut, replace with new.
2007 Hummer H3
2007 Driveline/Axle Wheel Drive Shafts - H3
Fig. 4: View Of Steering Knuckle Assembly
Courtesy of GENERAL MOTORS CORP.
3. Remove the steering knuckle assembly. Refer to Steering Knuckle Replacement .
2007 Hummer H3
2007 Driveline/Axle Wheel Drive Shafts - H3
Fig. 5: Removing Left Side Wheel Drive Shaft
Courtesy of GENERAL MOTORS CORP.
4. Release the wheel drive shaft by placing a brass drift against the tripod housing. Firmly
strike the brass drift with a hammer to release the drive shaft. Left side shown, right side
similar.
2007 Hummer H3
2007 Driveline/Axle Wheel Drive Shafts - H3
Fig. 6: View Of Front Wheel Drive Shaft
Courtesy of GENERAL MOTORS CORP.
5. Remove the front wheel drive shaft from the vehicle.
Installation Procedure
2007 Hummer H3
2007 Driveline/Axle Wheel Drive Shafts - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст