Hummer H3. Manual — part 456
Fig. 643: Identifying Camshaft Cover & Bolts
Courtesy of GENERAL MOTORS CORP.
1. Install a new camshaft cover seal.
2. Install the camshaft cover and bolts.
Tighten: Tighten the camshaft cover bolts to 10 N.m (89 lb in).
NOTE:
Refer to FASTENER NOTICE .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 644: View Of Ignition Control Modules & Bolts
Courtesy of GENERAL MOTORS CORP.
3. Install new ignition control module seals.
4. Install the ignition control modules and bolts.
Tighten: Tighten the ignition control module bolts to 10 N.m (89 lb in).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 645: View Of Coolant Temperature Sensor
Courtesy of GENERAL MOTORS CORP.
5. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the coolant temperature sensor
threads.
6. Install the coolant temperature sensor.
Tighten: Tighten the coolant temperature sensor to 16 N.m (12 lb ft).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
CAMSHAFT POSITION ACTUATOR SOLENOID VALVE INSTALLATION
Fig. 646: Identifying Camshaft Position Actuator Valve & Bolt
Courtesy of GENERAL MOTORS CORP.
1. Apply clean engine oil to the camshaft position actuator valve hole.
2. Install the camshaft position actuator valve.
3. Add threadlock GM P/N 12346004 (Canadian P/N 10953480) to the camshaft position
actuator valve bolt threads.
NOTE:
Refer to FASTENER NOTICE .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст