Hummer H3. Manual — part 428
base material.
Fig. 539: Cleaning Out Metal Chips
Courtesy of GENERAL MOTORS CORP.
5. Using compressed air, clean out any chips.
IMPORTANT: All chips must be removed from the tapped hole prior to
insert installation.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 540: Spraying Cleaner Into Tapped Hole
Courtesy of GENERAL MOTORS CORP.
6. Spray cleaner GM P/N 12377981 (Canadian P/N 10953463) or equivalent into the tapped
hole.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 541: Cleaning Out Metal Chips
Courtesy of GENERAL MOTORS CORP.
7. Using compressed air, clean out any chips.
IMPORTANT: All chips must be removed from the tapped hole prior to
insert installation.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 542: Lubricating Installer Tool Using Driver Oil
Courtesy of GENERAL MOTORS CORP.
8. Lubricate the threads of the driver installation tool (2) with the driver oil (1) J 42385-110.
IMPORTANT: Do not allow oil or other foreign material to contact the
outside diameter (OD) of the insert.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст