Hummer H3. Manual — part 352
Fig. 257: Identifying Engine Wiring Harness Retainer At Engine Wiring Harness
Bracket
Courtesy of GENERAL MOTORS CORP.
32. Disconnect the engine wiring harness retainer from the engine wiring harness bracket.
33. Position the engine wiring harness aside.
34. Disconnect the fuel feed pipe from the fuel rail. Refer to Metal Collar Quick Connect
Fitting Service .
35. Disconnect the evaporative emission (EVAP) pipe at the purge solenoid. Refer to Plastic
Collar Quick Connect Fitting Service .
36. Remove the oil level indicator and tube. Refer to Oil Level Indicator and Tube
Replacement.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 258: Identifying Intake Manifold & Attachments
Courtesy of GENERAL MOTORS CORP.
37. Remove the manifold absolute pressure (MAP) sensor. Refer to Manifold Absolute
Pressure Sensor Replacement .
38. Disconnect the MAP sensor wiring harness retainer (4) from the intake manifold.
39. Raise and support the vehicle only high enough to access the wiring harnesses through the
wheelhouse. Refer to Lifting and Jacking the Vehicle .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 259: View Of A/C Condenser Line Bolt & A/C Compressor
Courtesy of GENERAL MOTORS CORP.
40. Remove the A/C condenser line bolt at the A/C compressor, remove the line from the
compressor, if equipped.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 260: Identifying A/C Evaporator Line
Courtesy of GENERAL MOTORS CORP.
41. Remove the A/C evaporator line bolt at the A/C compressor, remove the line from the
compressor, if equipped.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст