Hummer H3. Manual — part 793
2-4 BAND, INPUT CLUTCHES, INPUT GEAR SET REMOVAL
Fig. 226: Identifying Band Anchor Pin
Courtesy of GENERAL MOTORS CORP.
1. Remove the band anchor pin (41).
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 227: Identifying Reverse Input Clutch Assembly & Input Housing
Courtesy of GENERAL MOTORS CORP.
2. Remove the input housing and shaft assembly (621), along with the reverse input clutch
housing and drum assembly (605).
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 228: View Of 2-4 Band Assembly
Courtesy of GENERAL MOTORS CORP.
3. Remove the 2-4 band assembly (602).
REACTION GEAR SET REMOVAL
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Fig. 229: View Of Output Shaft To Input Carrier Retainer
Courtesy of GENERAL MOTORS CORP.
1. Use snap ring pliers to remove the output shaft retainer ring (661).
IMPORTANT: The output shaft retainer ring (661) can not be reused, it must
be replaced.
2007 Hummer H3
2007 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст