Hummer H3. Manual — part 421
Fig. 511: View of Bushing Type Insert
Courtesy of GENERAL MOTORS CORP.
10. Install the insert (2) onto the driver installation tool (1).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 512: Applying Threadlock To Insert
Courtesy of GENERAL MOTORS CORP.
11. Apply threadlock sealant GM P/N 12345493 (Canadian P/N 10953488), J 42385-109,
LOCTITE 277® or equivalent (1) to the insert OD threads (2).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 513: Installing Insert Into Tapped Bolt Hole
Courtesy of GENERAL MOTORS CORP.
12. Install the insert (2) into the tapped hole.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 514: Installing Insert - Standard Thread
Courtesy of GENERAL MOTORS CORP.
IMPORTANT: If the insert will not thread down until the flange contacts the
counterbored surface, remove the insert immediately with a
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст