Hummer H3. Manual — part 949
Fig. 30: View Of Inner Drive Shaft
Courtesy of GENERAL MOTORS CORP.
1. Remove the inner drive shaft. Refer to Front Drive Axle Inner Shaft and Inner Shaft
Housing Replacement.
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Fig. 31: Removing Clutch Bearing
Courtesy of GENERAL MOTORS CORP.
2. Install the inner shaft in a clamping devise.
3. Install the J 29369-1 to the J 2619-01 . See Special Tools.
4. Using the J 29369-1 (1) and the J 2619-01 (2), remove the clutch bearing. See Special
Tools.
Installation Procedure
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Fig. 32: Installing Clutch Bearing
Courtesy of GENERAL MOTORS CORP.
1. Install the J 45233 to the J 8092 . See Special Tools.
2. Using the J 45233 (1) and the J 8092 (2), install the clutch bearing. See Special Tools.
3. Remove the inner shaft from the clamping devise.
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Fig. 33: View Of Inner Drive Shaft
Courtesy of GENERAL MOTORS CORP.
4. Install the inner shaft. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing
Replacement.
FRONT DRIVE AXLE SEAL AND BEARING REPLACEMENT
Tools Required
J 2619-01 Slide Hammer. See Special Tools.
J 8092 Universal Drive Handle 3/4 Inch - 10. See Special Tools.
J 21426 Extension Housing Seal Installer
J 29369-2 Bushing and Bearing Remover 2-3 inch. See Special Tools.
J 45232 Differential Bearing Adjuster Needle Bearing Installer - Left. See Special Tools.
2007 Hummer H3
2007 Driveline/Axle Front Drive Axle - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст