Hummer H3. Manual — part 1313
6
damage.
2. Inspect the drum portion of the rotors
for excessive wear, blueing
discoloration and heat spots.
3. If any of these conditions are present,
replace the affected components.
4. Adjust the park brake system.
Did you find and correct a condition?
Go to Step 14
Go to Step 7
7
Inspect the park brake system for proper
operation. Refer to Park Brake System
Diagnosis .
Did you find and correct a condition?
Go to Step 14
Go to Step 8
8
1. Inspect the disc brake system for the
following conditions:
Binding, incorrectly installed or
missing caliper hardware and/or
lining hardware-Ensure free
movement of linings and of
caliper, if equipped with sliding
type caliper
Lack of lubrication or excessive
corrosion on metal to metal
contact surfaces
Distorted or damaged linings
Damaged or excessively worn
caliper hardware and/or lining
hardware
Bent or damaged caliper or
mounting component
2. Adjust, repair or replace components
as necessary. Refer to Disc Brake
System Diagnosis.
Did you find and correct a condition?
Go to Step 14
Go to Step 9
1. Separate the brake booster pushrod
from the brake pedal.
2007 Hummer H3
2007 BRAKES Hydraulic Brakes - H3
9
2. Inspect the brake corners to determine
if the brake drag condition is still
present.
Do the brake corners still exhibit the brake
drag condition?
Go to Step 11
Go to Step 10
10
1. Inspect the pushrod for improper
positioning and/or damage. Correctly
position or replace the pushrod if
necessary.
2. Inspect the brake pedal assembly for
damage and replace if necessary.
Did you complete the repair or
replacement?
Go to Step 14
-
11
1. For vacuum boost systems, disconnect
the vacuum check valve from the
booster to relieve vacuum reserve.
2. Separate the master cylinder from the
brake booster. Do not disconnect any
brake pipes.
3. Inspect the brake corners to determine
if the brake drag condition is still
present.
Do the brake corners still exhibit the brake
drag condition?
Go to Step 13
Go to Step 12
12
Replace the brake booster assembly.
Did you complete the replacement?
Go to Step 14
-
13
1. Inspect the hydraulic brake system for
the following conditions.
Improper operation of caliper
pistons
Contaminated brake fluid
Internally damaged flexible
brake hoses; hindering brake
release
2007 Hummer H3
2007 BRAKES Hydraulic Brakes - H3
BRAKE SYSTEM SLOW RELEASE
Brake System Slow Release
Damaged or improperly
operating master cylinder
2. Adjust, repair or replace components
as necessary. Refer to Hydraulic
Brake System Diagnosis.
Did you find and correct a condition?
Go to Step 14
Go to
Diagnostic
Starting Point -
Hydraulic
Brakes
14
1. Install or connect components that
were removed or disconnected during
diagnosis.
2. Road test the vehicle in order to
confirm proper operation. Refer to
Brake System Vehicle Road Test.
Is the condition still present?
Go to Step 2
System OK
Step
Action
Yes
No
DEFINITION: Brake system releases and returns to rest slowly; vehicle motion is hindered
by brake system briefly after release of brake pedal.
1
Were you sent here from the Hydraulic
Brake Symptom table?
Go to Step 2
Go to
Diagnostic
Starting Point -
Hydraulic
Brakes
2
1. Inspect the hydraulic brake system for
the following conditions:
Improper operation of caliper
pistons
Internally damaged flexible
brake hoses; hindering brake
release
Contaminated brake fluid
Damaged or improperly
operating master cylinder
2007 Hummer H3
2007 BRAKES Hydraulic Brakes - H3
2. Adjust, repair or replace components
as necessary. Refer to Hydraulic
Brake System Diagnosis.
Did you find and correct a condition?
Go to Step 5
Go to Step 3
3
1. Inspect the brake assist system for the
following conditions:
Binding, bent or damaged pedal
pushrod, pedal or pedal bracket
Damaged or improperly
operating vacuum booster, if
equipped
Restricted return hose from
hydraulic booster, if equipped
Damaged or improperly
operating hydraulic booster, if
equipped
2. Adjust, repair or replace components
as necessary. Refer to Brake Assist
System Diagnosis.
Did you find and correct a condition?
Go to Step 5
Go to Step 4
4
1. Inspect the disc brake system for the
following conditions:
Damaged or excessively worn
caliper hardware and/or lining
hardware
Distorted or damaged linings
Lack of lubrication or excessive
corrosion on metal to metal
contact surfaces
Bent or damaged caliper or
mounting component
2. Adjust, repair or replace components
as necessary. Refer to Disc Brake
System Diagnosis.
Go to
Diagnostic
Starting Point -
Hydraulic
2007 Hummer H3
2007 BRAKES Hydraulic Brakes - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст