Hummer H3. Manual — part 1441
![](/vehicles/kig/fin/xam/whriintaneer.png)
Fig. 132: Identifying Position Lamp Bulb
Courtesy of GENERAL MOTORS CORP.
Position Lamp Bulb Replacement
Callout
Component Name
Preliminary Procedure:
Remove either the RH or LH front wheelhouse panel. Refer to Wheelhouse Panel
Replacement (Front) or Wheelhouse Panel Replacement (Rear) .
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Lighting - H3
![](/vehicles/kig/fin/xam/qusarieee.png)
FRONT SIDE MARKER LAMP REPLACEMENT (BASE)
Fig. 133: Marker Lamp Replacement - Front Side
Courtesy of GENERAL MOTORS CORP.
Front Side Marker Lamp Replacement (Base)
1
Front Position Lamp Bulb
Tip:
1. Twist the lamp socket counterclockwise to remove from the lamp
assembly.
2. Remove the bulb from the lamp socket.
Callout
Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedure
1. Remove either the RH or LH wheelhouse panel. Refer to Wheelhouse Panel
Replacement (Front) or Wheelhouse Panel Replacement (Rear) .
2. Disconnect the electrical socket from the front marker lamp, twist counterclockwise to
remove.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Lighting - H3
![](/vehicles/kig/fin/xam/slath.png)
FRONT SIDE MARKER LAMP REPLACEMENT (WITH BRM AND RHD)
Fig. 134: Replacing Front Side Marker Lam
Courtesy of GENERAL MOTORS CORP.
Front Side Marker Lamp Replacement (with BRM and RHD)
1
Lamp Assembly, Front Side Marker (Qty: 2)
Tip: Pinch the clips and push the marker lamp outboard from the wheel
opening flare.
Callout
Component Name
Preliminary Procedure
1. Remove either the RH or LH wheelhouse panel. Refer to Wheelhouse Panel
Replacement (Front) or Wheelhouse Panel Replacement (Rear) .
2. Disconnect the electrical socket from the front indicator lamp.
1
Front Side Indicator Lamp Assembly
Tip: Pinch the clips and push the marker lamp outboard from the wheel
opening flare.
2
Indicator Lamp Socket
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Lighting - H3
![](/vehicles/kig/fin/xam/ofa.png)
FRONT SIDE MARKER LAMP BULB REPLACEMENT
Fig. 135: Marker Lamp Replacement - Front Side
Courtesy of GENERAL MOTORS CORP.
Front Side Marker Lamp Bulb Replacement
ROOF MARKER LAMP PACKAGE INSTALLATION
Installation Procedure
1. Follow the Wiring Systems sub-section for splicing wires using splice sleeves. Refer to
3
Indicator Lamp Bulb
Tip: Replace the bulb as needed.
Callout
Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedures
1. Remove the front wheelhouse panel. Refer Wheelhouse Panel Replacement (Front)
or Wheelhouse Panel Replacement (Rear) .
2. Remove the electrical socket by twisting counterclockwise.
1
Bulb, Front Marker Lamp (Qty: 1)
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Lighting - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст