Hummer H3. Manual — part 1240

Fig. 22: View Of Rear Bushing
Courtesy of GENERAL MOTORS CORP.

2. Install the rear bushing to the predetermined measurement taken earlier.

3. Install the lower control arm. Refer to Lower Control Arm Replacement.

4. Install the front drive axle, if equipped. Refer to Differential Carrier Assembly

Replacement .

SPRING BUMPER REPLACEMENT

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2007 Hummer H3

2007 SUSPENSION Front Suspension - H3

Fig. 23: View Of Jounce Bumper - 4WD
Courtesy of GENERAL MOTORS CORP.

2. Remove the jounce bumper.

Installation Procedure

2007 Hummer H3

2007 SUSPENSION Front Suspension - H3

Fig. 24: View Of Jounce Bumper - 4WD
Courtesy of GENERAL MOTORS CORP.

1. Install the jounce bumper.

2. Lower the vehicle.

WHEEL STUD REPLACEMENT

Tools Required

J 43631 Ball Joint Remover. See Special Tools.

Removal Procedure

2007 Hummer H3

2007 SUSPENSION Front Suspension - H3

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .

3. Remove the brake rotor. Refer to Front Brake Rotor Replacement .

Fig. 25: Removing Wheel Stud From Hub Flange
Courtesy of GENERAL MOTORS CORP.

2007 Hummer H3

2007 SUSPENSION Front Suspension - H3