Hummer H3. Manual — part 1592

Fig. 35: View Of Power Steering Hose Assembly
Courtesy of GENERAL MOTORS CORP.

5. Disconnect the power steering gear inlet and outlet hose from the steering gear. Refer to

Power Steering Gear Inlet and Outlet Hose Replacement.

6. Disconnect the lower intermediate steering shaft from the steering gear. Refer to Lower

Intermediate Steering Shaft Replacement .

2007 Hummer H3

2007 STEERING Power Steering - H3

Fig. 36: View Of Steering Gear Vertical Mounting Bolts
Courtesy of GENERAL MOTORS CORP.

7. Remove the vertical steering gear nut, washer and bolt.

Left hand drive shown, right hand drive similar.

2007 Hummer H3

2007 STEERING Power Steering - H3

Fig. 37: View Of Steering Gear Horizontal Mounting Bolts
Courtesy of GENERAL MOTORS CORP.

8. Remove the horizontal steering gear nut, washer and bolt.

Left hand drive shown, right hand drive similar.

9. Remove the steering gear bracket bolts and bracket.

10. Remove the steering gear from the vehicle.

Installation Procedure

1. Install the steering gear to the vehicle.

2007 Hummer H3

2007 STEERING Power Steering - H3

Fig. 38: View Of Steering Gear Horizontal Mounting Bolts
Courtesy of GENERAL MOTORS CORP.

2. Install the steering gear bracket and bolts.

Left hand drive shown, right hand drive similar.

Tighten: Tighten the bolts to 100 N.m (74 lb ft).

3. Install the horizontal steering gear nut, washer and bolt.

Tighten: Tighten the bolt to 130 N.m (96 lb ft).

NOTE:

Refer to Fastener Notice .

IMPORTANT: Hand start all bolts before finalizing any torques.

2007 Hummer H3

2007 STEERING Power Steering - H3