Hummer H3. Manual — part 444
Fig. 599: View Of Crankshaft Position Sensor
Courtesy of GENERAL MOTORS CORP.
7. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the crankshaft position sensor
bolt.
8. Install the crankshaft position sensor and bolt.
Tighten: Tighten the crankshaft position sensor bolt to 10 N.m (89 lb in).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 600: View Of Oil Pressure Switch
Courtesy of GENERAL MOTORS CORP.
9. Install the oil pressure switch.
Tighten: Tighten the oil pressure switch to 20 N.m (15 lb ft).
CLUTCH PILOT BEARING INSTALLATION
Tools Required
J 45949 Pilot Bearing and Flywheel Locator Installer. See Special Tools.
Installation Procedure
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 601: View Of Clutch Pilot Bearing
Courtesy of GENERAL MOTORS CORP.
1. Install J 45949 into the pilot bearing. See Special Tools.
2. Install the pilot bearing into the crankshaft.
3. Remove J 45949 . See Special Tools.
AUTOMATIC TRANSMISSION FLYWHEEL LOCATOR INSTALLATION
Tools Required
J 45949 Pilot Bearing and Flywheel Locator Installer. See Special Tools.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Installation Procedure
Fig. 602: View Of Flywheel Locator
Courtesy of GENERAL MOTORS CORP.
1. Install J 45949 into the flywheel locator. See Special Tools.
2. Install the flywheel locator into the crankshaft.
3. Remove J 45949 . See Special Tools.
CRANKSHAFT AND BEARING INSTALLATION
Tools Required
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст