Hummer H1 (2006+). Manual — part 184
4-16
Cooling System
__________________________________________________________
Figure 4-13: Radiator Lower Tube Assembly Location
DRAIN VALVE
LOWER TUBE
SURGE TANK-TO-
ASSEMBLY
LOWER RADIATOR
HOSE
LOWER
RADIATOR HOSE
WATER PUMP
INLET HOSE
11-1-05
_________________________________________________________
Cooling System 4-17
5745804
WATER PUMP INLET HOSE REPLACEMENT
Removal
1.
Drain the cooling system.
2.
Loosen the clamps and remove the water pump inlet hose from the water pump and lower tube assembly (Figure 4-13).
Installation
1.
Connect the water pump inlet hose to the lower tube assembly and the water pump and tighten the clamps (Figure 4-13).
2.
Fill the cooling system. See cooling system service for proper filling and bleeding procedure.
SURGE TANK OVERFLOW HOSE REPLACEMENT
Removal
1.
Remove the overflow hose from the surge tank filler neck (Figure 4-14).
2.
Remove the screw, clamp, and the overflow hose from the body.
Installation
1.
Connect the overflow hose to the surge tank filler neck (Figure 4-14).
2.
Secure the overflow hose to the body with the clamp.
Figure 4-14: Surge Tank Overflow Hose Mounting
OVER FLOW
HOSE
SURGE
TANK
4-18
Cooling System
__________________________________________________________
SURGE TANK-TO-LOWER RADIATOR TUBE HOSE REPLACEMENT
Removal
1.
Drain the cooling system.
2.
Loosen the clamps and remove the hose from the surge tank and lower tube assembly (Figure 4-15).
Installation
1.
Install the hose on the lower tube assembly and the surge tank and tighten the clamps (Figure 4-15).
2.
Fill the cooling system. See cooling system service for proper filling and bleeding procedure.
_________________________________________________________
Cooling System 4-19
5745804
Figure 4-15: Surge Tank-to-Lower Tube Assembly Hose Location
DRAIN VALVE
LOWER TUBE
SURGE TANK-TO-
ASSEMBLY
LOWER RADIATOR
HOSE
LOWER
RADIATOR HOSE
WATER PUMP
INLET HOSE
11-1-05
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст