Hummer H2. Manual — part 1760
z
Tighten the M8 engine lift bracket bolts to 25 N.m (18 lb ft).
z
Tighten the M10 engine lift bracket bolts to 50 N.m (37 lb ft).
Fig. 232: Engine Mount-To-Engine Mount Bracket
Courtesy of GENERAL MOTORS CORP.
43. Remove the left and right engine mount-to-engine mount bracket bolts.
44. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 233: Engine Shield Bolts
Courtesy of GENERAL MOTORS CORP.
45. Remove the engine shield bolts and shield.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 234: Ladder Shield, Bolts & Plate
Courtesy of GENERAL MOTORS CORP.
46. Remove the ladder shields bolts and plate.
47. Drain the engine oil.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 235: Flywheel-To-Torque Converter Bolts
Courtesy of GENERAL MOTORS CORP.
48. Remove the flywheel to torque converter bolts.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст