Hummer H2. Manual — part 255
Fig. 30: Applying Glass Prep (Clear #1)
Courtesy of GENERAL MOTORS CORP.
14. Apply a second coat of the glass prep clear #1 to the same area of the glass.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Stationary Windows - Hummer H2
Fig. 31: Applying Glass Primer (Black #2)
Courtesy of GENERAL MOTORS CORP.
15. Shake the glass primer black #2 for at least 1 minute.
16. Use a new dauber in order to apply the glass primer black #2 to the same areas (2) that glass prep clear #1
was applied.
17. Allow the glass primer to dry for approximately 10 minutes.
IMPORTANT: The glass primer black #2 is effective up to 8 hours after applying it to the
glass. The primed surface of the glass must be kept clean.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Stationary Windows - Hummer H2
Fig. 32: Modified Applicator Nozzle
Courtesy of GENERAL MOTORS CORP.
18. Cut the applicator nozzle in order to provide a bead of 12.7 mm (1/2 in) wide and 12.7 mm (1/2 in) high.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Stationary Windows - Hummer H2
Fig. 33: Applying Urethane Adhesive
Courtesy of GENERAL MOTORS CORP.
19. Use a cartridge-type caulking gun in order to apply a smooth, continuous bead of urethane adhesive.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Stationary Windows - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст