Hummer H2. Manual — part 2532
Fig. 102: View Of Low And Reverse Clutch Spring Assembly & Retainer Ring
Courtesy of GENERAL MOTORS CORP.
4. Install the low and reverse clutch spring assembly (694).
1. Using the J 23327-1 , compress the low and reverse clutch spring assembly (694).
2. Using J 36850 install the low and reverse clutch retainer ring (693).
INNER MANUAL LINKAGE INSTALLATION
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 103: Locating Parking Brake Pawl & Return Spring
Courtesy of GENERAL MOTORS CORP.
1. Install the parking lock bracket (86).
2. Install the parking lock bracket bolt (87).
Tighten: Tighten the bolt to 31 N.m (23 lb ft).
3. Inspect the following items:
z
The parking brake pawl (81) for damage or cracks
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
z
The parking pawl return spring (80) for being broken or missing
Fig. 104: Identifying Inner Manual Linkage Inspection Areas
Courtesy of GENERAL MOTORS CORP.
4. Inspect the following items:
z
The manual shaft retainer (83) for damage or cracks
z
The manual shaft (84) for damage or burrs
z
The parking lock actuator assembly (85) for damage
z
The inside detent lever (88) for damage or cracks
z
The manual valve link (89) for damage
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
z
The hex head nut (90) for damage or stripped threads
5. Install the following items:
z
The inside detent lever (88)
z
The parking lock actuator assembly (85)
z
The manual shaft (84) (model dependent)
z
The manual shaft retainer (83)
z
The hex head nut (90)
z
The manual valve link (89)
Tighten: Tighten the nut to 31 N.m (23 lb ft).
REACTION GEAR AND CARRIER INSPECTION
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст