Hummer H2. Manual — part 892
Fig. 8: Differential Bearing Retainer
Courtesy of GENERAL MOTORS CORP.
3. Remove the differential bearing retainer by performing the following steps:
1. With the aid of an assistant, push the differential bearing race down towards the differential case in
order to relieve the pressure against the differential bearing retainer.
2. Remove the differential bearing retainer.
IMPORTANT: The differential bearing race must be compressed in order to remove the
differential bearing retainer.
2004 Hummer H2
2004 DRIVELINE/AXLE Drive Axle - Locking/Limited Slip - Hummer H2
Fig. 9: Differential Bearing Race
Courtesy of GENERAL MOTORS CORP.
4. Remove the differential bearing race.
5. Remove the locking differential coil assembly.
2004 Hummer H2
2004 DRIVELINE/AXLE Drive Axle - Locking/Limited Slip - Hummer H2
Fig. 10: Removing Differential Bearing Assembly
Courtesy of GENERAL MOTORS CORP.
6. Remove the differential bearing assembly.
2004 Hummer H2
2004 DRIVELINE/AXLE Drive Axle - Locking/Limited Slip - Hummer H2
Fig. 11: Locking Differential Coil Plate
Courtesy of GENERAL MOTORS CORP.
7. Remove the locking differential coil plate.
2004 Hummer H2
2004 DRIVELINE/AXLE Drive Axle - Locking/Limited Slip - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст