Hummer H2. Manual — part 1744

Fig. 170: Identifying Studs & Bolt Securing Transmission To Engine
Courtesy of GENERAL MOTORS CORP.

7. Install the bottom bolt on the left side until snug.

Tighten:

1. Tighten the oil pan and oil pan-to-oil pan front cover bolts to 25 N.m (18 lb ft).

2. Tighten the oil pan-to-rear cover bolts to 12 N.m (106 lb in).

3. Tighten the bellhousing, converter cover, and transmission bolts/stud to 50 N.m (37 lb ft).

NOTE:

Refer to Fastener Notice in Cautions and Notices.

2004 Hummer H2

2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2

Fig. 171: Positive Battery Cable Clip & Bolt
Courtesy of GENERAL MOTORS CORP.

8. Install the positive battery cable clip and bolt to the oil pan.

Tighten: Tighten the positive battery cable clip bolt to 9 N.m (80 lb in).

9. Install the engine oil cooler lines to the positive battery cable clip.

2004 Hummer H2

2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2

Fig. 172: Positive Battery Cable Clip
Courtesy of GENERAL MOTORS CORP.

10. Install the following to the positive battery cable clip:

z

Engine wiring harness clip

z

Positive battery cable clip

2004 Hummer H2

2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2

Fig. 173: Battery Cable Channel Bolt
Courtesy of GENERAL MOTORS CORP.

11. Slide the channel pin in to the oil pan tab.

12. Install the battery cable channel bolt.

2004 Hummer H2

2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2