Hummer H2. Manual — part 1299

Fig. 117: Electrical Center & Housing
Courtesy of GENERAL MOTORS CORP.

8. Push on the tabs (2) in order to lift the electrical center (1) out of the housing.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Wiring Systems - Hummer H2

Fig. 118: Engine Electrical Center Bracket Assembly
Courtesy of GENERAL MOTORS CORP.

9. To replace the engine electrical center bracket remove the 4 retaining bolts (1).

10. Remove the engine electrical center bracket assembly from the fender.

Installation Procedure

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Wiring Systems - Hummer H2

Fig. 119: Engine Electrical Center Bracket Assembly
Courtesy of GENERAL MOTORS CORP.

1. Install the engine electrical center bracket assembly to the front fender.

2. Install the 4 retaining bolts (1).

NOTE:

Refer to Fastener Notice in Cautions and Notices.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Wiring Systems - Hummer H2

Tighten: Tighten the 4 retaining bolts (1) to 9 N.m (80 lb in).

Fig. 120: Electrical Center & Housing
Courtesy of GENERAL MOTORS CORP.

3. Align the electrical center block (1) stubs in the slots so that the tabs (2) retains it in place.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Wiring Systems - Hummer H2