Hummer H2. Manual — part 2546
Fig. 156: Inspecting Forward Clutch Piston For Damage Or Wear
Courtesy of GENERAL MOTORS CORP.
5. Inspect the forward clutch piston for the following conditions:
z
Porosity or damage
z
Seal damage
z
Apply leg damage
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 157: Installing Forward Clutch Piston
Courtesy of GENERAL MOTORS CORP.
6. Install the forward clutch piston (630) into the forward clutch housing (628).
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 158: Locating 3rd & 4th Spring Assembly
Courtesy of GENERAL MOTORS CORP.
7. Install the 3rd and 4th spring assembly (626) into the 3rd and 4th clutch apply ring (625).
IMPORTANT: The forward clutch piston (630) apply legs must be indexed with the 3rd
and 4th clutch apply ring (625) legs.
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
8. Install the forward clutch housing (628) and forward clutch piston (630) into the 3rd and 4th apply ring
(625).
Fig. 159: View Of J 29883 Installed In Input Housing
Courtesy of GENERAL MOTORS CORP.
9. Install the J 29883 on the input housing.
10. Install the 3rd and 4th clutch apply ring and the forward housing and piston assembly using the following
procedure:
z
Hold the assembly by the 3rd and 4th clutch apply ring (625) legs during installation.
z
Do not let the forward clutch piston (630) separate from the forward clutch housing.
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст