Hummer H2. Manual — part 1811
2. Dry the components with compressed air.
Fig. 425: Inspecting Connecting Rod For Damage
CAUTION: Wear safety glasses in order to avoid eye damage.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Courtesy of GENERAL MOTORS CORP.
3. Inspect the connecting rod for the following conditions:
z
Twisting (1)
z
Proper fit of the connecting rod and cap mating surfaces (2)
z
Nicks or gouges in the bearing bore (3)
z
Damage to the bearing locating slots (4)
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 426: Connecting Rod Bearing Bore
Courtesy of GENERAL MOTORS CORP.
4. Measure the connecting rod bearing bore (1) for an out-of-round condition. Refer to Engine Mechanical
Specifications .
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 427: Measuring Piston Pin Diameter
Courtesy of GENERAL MOTORS CORP.
5. To determine full-floating piston pin-to-connecting rod bore clearance, use a micrometer and measure the
piston pin outside diameter (OD).
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст