Hummer H2. Manual — part 2300
Fig. 233: Reaction Carrier Assembly
Courtesy of GENERAL MOTORS CORP.
8. Remove the reaction carrier assembly (681).
IMPORTANT: The reaction carrier assembly (681) can be a 4 or 5 pinion design
depending on the transmission model.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 234: Low & Reverse Clutch Components
Courtesy of GENERAL MOTORS CORP.
9. Remove the following components:
1. The low and reverse clutch fiber plate assembly (682C)
2. The low and reverse clutch steel plates (682D)
3. The low and reverse clutch selective plate (682B)
4. The low and reverse clutch waved plate (682A)
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 235: Reaction Gear Components
Courtesy of GENERAL MOTORS CORP.
10. Remove the following components:
1. The thrust bearing assembly (reaction carrier support) (683)
2. The internal reaction gear (684)
3. The internal reaction gear support (685)
4. The reaction gear support bearing (692)
INNER MANUAL LINKAGE REMOVAL
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 236: Inner Manual Linkage Components
Courtesy of GENERAL MOTORS CORP.
1. Remove the following parts:
1. Hex head nut (90)
2. Manual valve link (89)
3. Detent lever (88)
4. Parking lock actuator assembly (85)
5. Manual shaft retainer (83)
6. Manual shaft (84)
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст