Hummer H2. Manual — part 2145
6. Disconnect the upper intermediate shaft from the lower intermediate shaft.
Fig. 8: Steering Column & Upper Intermediate Shaft
Courtesy of GENERAL MOTORS CORP.
7. Disconnect the upper intermediate shaft from the steering column.
8. Remove the upper intermediate shaft from the vehicle.
Installation Procedure
2004 Hummer H2
2004 STEERING Steering Wheel and Column - Hummer H2
Fig. 9: Steering Column & Upper Intermediate Shaft
Courtesy of GENERAL MOTORS CORP.
1. Install the upper intermediate shaft to the vehicle.
2. Connect the upper intermediate shaft to the steering column.
2004 Hummer H2
2004 STEERING Steering Wheel and Column - Hummer H2
Fig. 10: Upper Intermediate Shaft & Lower Intermediate Shaft
Courtesy of GENERAL MOTORS CORP.
3. Connect the upper intermediate shaft to the lower intermediate shaft.
4. Install the upper intermediate shaft to the lower intermediate shaft pinch bolt.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 STEERING Steering Wheel and Column - Hummer H2
Tighten: Tighten the upper intermediate shaft pinch bolt to 50 N.m (37 lb ft).
Fig. 11: Nut & Bolt To Upper Shaft To Steering Column
Courtesy of GENERAL MOTORS CORP.
5. Install the upper intermediate shaft to the steering column pinch bolt and nut.
IMPORTANT: The upper intermediate shaft to the steering column pinch bolt must be
installed in the same direction it was removed or the pinch bolt will
contact the steering column housing.
2004 Hummer H2
2004 STEERING Steering Wheel and Column - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст