Hummer H2. Manual — part 550
2. Starting at one side, remove the weatherstrip by pulling the weatherstrip off of the flange in the door
window frame (1).
Installation Procedure
Fig. 126: Rear Door Window Weatherstrip
Courtesy of GENERAL MOTORS CORP.
1. Position the window in the full down position.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
2. Install weatherstrip by pressing the weatherstrip down on the flange in the door frame (1), ensuring that it
is fully seated.
WEATHERSTRIP REPLACEMENT - FRONT DOOR UPPER AUXILIARY
Removal Procedure
1. Open both front and rear side doors.
Fig. 127: Upper Door Weatherstrip (Front Door)
Courtesy of GENERAL MOTORS CORP.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
2. Remove the weatherstrip (2) by pulling the weatherstrip off of the pinch-weld flange (1).
Installation Procedure
Fig. 128: Upper Door Weatherstrip (Front Door)
Courtesy of GENERAL MOTORS CORP.
1. Starting at the center of the door openings, install the weatherstrip (2) to the pinch-weld flange (1) and
work across the right and left sides towards the ends of the weatherstrip, being careful not to stretch the
weatherstrip during installation.
2. Close the door.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
WEATHERSTRIP REPLACEMENT - REAR DOOR UPPER AUXILIARY
Removal Procedure
1. Open both front and rear side doors.
Fig. 129: Upper Door Weatherstrip (Rear Door)
Courtesy of GENERAL MOTORS CORP.
2. Remove the weatherstrip (2) by pulling the weatherstrip off of the pinch-weld flange (1).
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст