Hummer H2. Manual — part 2297
Fig. 221: Reverse Input & Input Clutch Assembly
Courtesy of GENERAL MOTORS CORP.
2. Remove the input housing and shaft assembly and the reverse input clutch housing and drum assembly.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 222: 2-4 Band Assembly
Courtesy of GENERAL MOTORS CORP.
3. Remove the 2-4 band assembly (602).
REACTION GEAR SET REMOVAL
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 223: Removing Output Shaft To Input Carrier Retainer
Courtesy of GENERAL MOTORS CORP.
1. Use snap ring pliers remove the output shaft to input carrier retainer (661).
IMPORTANT: The retainer must be replaced.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 224: Input Carrier Assembly & Bearing Assembly
Courtesy of GENERAL MOTORS CORP.
2. Remove the input carrier assembly (662) and remove the bearing assembly (663).
IMPORTANT: The carrier assembly can be a 4 or 5 pinion design depending on model.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст