Hummer H2. Manual — part 2252
Fig. 49: Tow/Haul Switch
Courtesy of GENERAL MOTORS CORP.
4. Remove the switch from the recepticle.
Installation Procedure
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 50: Tow/Haul Switch
Courtesy of GENERAL MOTORS CORP.
1. Install the switch to the recepticle.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 51: Switch Recepticle & Instrument Panel
Courtesy of GENERAL MOTORS CORP.
2. Connect the electrical connector to the switch. Install the switch recepticle to the instrument panel.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 52: Switch Recepticle Screws
Courtesy of GENERAL MOTORS CORP.
3. Install the switch recepticle screws.
Tighten: Tighten the screws to 12 N.m (106 lb in).
NOTE:
Fastener Notice in Cautions and Notices
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст