Hummer H2. Manual — part 2513
Fig. 27: Compressing Servo Cover With J 29714-A
Courtesy of GENERAL MOTORS CORP.
2. Tighten the J 29714-A bolt to compress the servo cover.
IMPORTANT: If cover does not move inwards with tool, use a block of wood or suitable
material and lightly tap on cover using a hammer to free up cover in bore.
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 28: Locating Servo Cover Retaining Ring
Courtesy of GENERAL MOTORS CORP.
3. Remove the servo cover retaining ring (29) and the J 29714-A .
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 29: View Of 2-4 Servo Assembly
Courtesy of GENERAL MOTORS CORP.
4. Remove the servo cover (28) and O-ring seal (27). If the servo cover seems to be hung up on the seal, cut
and remove the O-ring seal before removing the cover.
5. Remove the 2-4 servo assembly.
2-4 SERVO PIN LENGTH CHECK
Tools Required
J 33037 2-4 Intermediate Band Apply Pin Gage. See Special Tools and Equipment .
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Checking Procedure
Fig. 30: 2-4 Servo Assembly
Courtesy of GENERAL MOTORS CORP.
1. Disassemble the 2-4 servo assembly. If necessary, refer to 2-4 Servo Disassemble .
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст